PART NAME  : 8932M-Split Line
REV NUMBER : 
SER NUMBER : 
STATS COUNT : 1
 
STARTUP    =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            PREHIT/1.5
            RETRACT/1.5
            MOVESPEED/ 100
            MANRETRACT/0.5
            FLY/ON
            FASTPROBEMODE/ON
            FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, , 
            LOADPROBE/TIP 5
            TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
C4         =COMMENT/YESNO,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            ***Do you want to SKIP Manual Alignment?**
            IF_GOTO/C4.INPUT=="YES",GOTO = SKIP_MANUAL
            COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            **Take hit top dead center**
PNT1       =FEAT/POINT,CARTESIAN
            THEO/<0,0,8>,<0,0,1>
            ACTL/<666.573,12.659,-829.537>,<0.0046228,0.0206033,0.999777>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<0,0,8>,<0,0,1>,<666.573,12.659,-829.537>,USE THEO=YES
            ENDMEAS/
SKIP_MANUAL=LABEL/
MANUAL     =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/TRANS,XAXIS,PNT1
              ALIGNMENT/TRANS,YAXIS,PNT1
              ALIGNMENT/TRANS,ZAXIS,PNT1
            ALIGNMENT/END
            MODE/DCC
            ASSIGN/PTNUM=STR(GETTEXT(191, 1, {FILEHEDR}))
C1         =COMMENT/INPUT,NO,FULL SCREEN=NO,
            Enter Cavity number
C2         =COMMENT/INPUT,NO,FULL SCREEN=NO,
            Enter Part number
C3         =COMMENT/INPUT,NO,FULL SCREEN=NO,
            Enter Job number
            CLEARP/ZPLUS,25,ZPLUS,0,ON
            MOVE/CLEARPOINT
            MOVE/CLEARPLANE
PLN1       =FEAT/PLANE,CARTESIAN,TRIANGLE
            THEO/<-4.292,0.897,-8>,<0,0,1>
            ACTL/<-4.293,0.895,-8.002>,<0.0013389,0.0045766,0.9999886>
            MEAS/PLANE,3
              MOVE/CLEARPLANE
              HIT/BASIC,NORMAL,<-12.838,2.134,-8>,<0,0,1>,<-12.84,2.134,-7.996>,USE THEO=YES
              HIT/BASIC,NORMAL,<-12.911,-1.867,-8>,<0,0,1>,<-12.913,-1.872,-7.978>,USE THEO=YES
              MOVE/CLEARPLANE
              HIT/BASIC,NORMAL,<12.875,2.425,-8>,<0,0,1>,<12.874,2.423,-8.032>,USE THEO=YES
            ENDMEAS/
LIN1       =FEAT/LINE,CARTESIAN,UNBOUNDED
            THEO/<-3.01,3.38,-3>,<1,0,0>
            ACTL/<-3.01,3.417,-2.999>,<0.9999983,0.0018195,0>
            MEAS/LINE,2,ZPLUS
              MOVE/CLEARPLANE
              HIT/BASIC,NORMAL,<-3.01,3.38,-3>,<0,1,0>,<-3.01,3.417,-3.001>,USE THEO=YES
              HIT/BASIC,NORMAL,<9.565,3.38,-3>,<0,1,0>,<9.545,3.44,-2.998>,USE THEO=YES
            ENDMEAS/
PNT2       =FEAT/POINT,CARTESIAN
            THEO/<11.927,0,-3>,<1,0,0>
            ACTL/<11.802,0,-3>,<1,0,0>
            MEAS/POINT,1,WORKPLANE
              MOVE/CLEARPLANE
              HIT/BASIC,NORMAL,<11.927,0,-3>,<1,0,0>,<11.802,0,-3>,USE THEO=YES
            ENDMEAS/
FIND_PART  =ALIGNMENT/START,RECALL:MANUAL,LIST=YES
              ALIGNMENT/LEVEL,ZPLUS,PLN1
              ALIGNMENT/TRANS,ZAXIS,PLN1
              ALIGNMENT/ROTATE,XPLUS,TO,LIN1,ABOUT,ZPLUS
              ALIGNMENT/TRANS,YAXIS,LIN1
              ALIGNMENT/TRANS,XAXIS,PNT2
            ALIGNMENT/END
            SCANSPEED/1
            MOVE/CLEARPLANE
PNT11      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-15.032,-6.823,1>,<0,-1,0>
            ACTL/<-15.031,-6.759,0.998>,<0,-1,0>
            TARG/<-15.032,-6.823,1>,<0,-1,0>
            SNAP=NO
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
            MOVE/CLEARPLANE
PNT12      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-3.009,-6.832,1>,<0,-1,0>
            ACTL/<-3.005,-6.754,0.998>,<0,-1,0>
            TARG/<-3.009,-6.832,1>,<0,-1,0>
            SNAP=NO
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
            MOVE/CLEARPLANE
PNT13      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<0,-3.425,1>,<1,0,0>
            ACTL/<0.085,-3.425,1>,<1,0,0>
            TARG/<0,-3.425,1>,<1,0,0>
            SNAP=NO
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
            MOVE/CLEARPLANE
PNT14      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-24.359,-3.4,1>,<-1,0,0>
            ACTL/<-24.309,-3.402,0.998>,<-1,0,0>
            TARG/<-24.359,-3.4,1>,<-1,0,0>
            SNAP=NO
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
SCN1       =FEAT/SCAN,PERIMETER,NUMBER OF HITS=15,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=15,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN2       =FEAT/SCAN,PERIMETER,NUMBER OF HITS=13,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=13,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN3       =FEAT/SCAN,PERIMETER,NUMBER OF HITS=69,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=69,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN4       =BASICSCAN/CIRCLE,NUMBER OF HITS=41,SHOW HITS=NO,SHOWALLPARAMS=NO
            ENDSCAN
            MOVE/CLEARPLANE
SCN5       =FEAT/SCAN,PERIMETER,NUMBER OF HITS=58,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=58,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN6       =FEAT/SCAN,PERIMETER,NUMBER OF HITS=69,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=69,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN7       =BASICSCAN/CIRCLE,NUMBER OF HITS=41,SHOW HITS=NO,SHOWALLPARAMS=NO
            ENDSCAN
            MOVE/CLEARPLANE
SCN8       =FEAT/SCAN,PERIMETER,NUMBER OF HITS=86,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=86,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN9       =FEAT/SCAN,PERIMETER,NUMBER OF HITS=20,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=20,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN10      =FEAT/SCAN,PERIMETER,NUMBER OF HITS=26,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=26,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN11      =FEAT/SCAN,PERIMETER,NUMBER OF HITS=27,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=27,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
            SCANSPEED/0.2
SCN12      =FEAT/SCAN,PERIMETER,NUMBER OF HITS=91,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=91,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            SCANSPEED/1
            MOVE/CLEARPLANE
SCN13      =FEAT/SCAN,PERIMETER,NUMBER OF HITS=93,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=93,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN14      =FEAT/SCAN,PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN15      =FEAT/SCAN,PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN16      =FEAT/SCAN,PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN17      =FEAT/SCAN,PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
PNT3       =FEAT/POINT,CARTESIAN
            THEO/<-20.919,-10.904,-0.408>,<0,-1,0>
            ACTL/<-20.919,-10.855,-0.409>,<0,-1,0>
            MEAS/POINT,1,WORKPLANE
              MOVE/CLEARPLANE
              HIT/BASIC,NORMAL,<-20.919,-10.904,-0.408>,<0,-1,0>,<-20.919,-10.855,-0.409>,USE THEO=YES
            ENDMEAS/
PNT4       =FEAT/POINT,CARTESIAN
            THEO/<-14.912,-10.904,-0.408>,<0,-1,0>
            ACTL/<-14.928,-10.841,-0.41>,<0,-1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-14.912,-10.904,-0.408>,<0,-1,0>,<-14.928,-10.841,-0.41>,USE THEO=YES
            ENDMEAS/
PNT5       =FEAT/POINT,CARTESIAN
            THEO/<-8.945,-10.904,-0.408>,<0,-1,0>
            ACTL/<-8.963,-10.841,-0.411>,<0,-1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-8.945,-10.904,-0.408>,<0,-1,0>,<-8.963,-10.841,-0.411>,USE THEO=YES
            ENDMEAS/
PNT6       =FEAT/POINT,CARTESIAN
            THEO/<-2.925,-10.904,-0.408>,<0,-1,0>
            ACTL/<-2.942,-10.867,-0.411>,<0,-1,0>
            MEAS/POINT,1,WORKPLANE
              HIT/BASIC,NORMAL,<-2.925,-10.904,-0.408>,<0,-1,0>,<-2.942,-10.867,-0.411>,USE THEO=YES
            ENDMEAS/
            MOVE/CLEARPLANE
SCN18      =FEAT/SCAN,PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/PERIMETER,NUMBER OF HITS=21,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN19_1    =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=11,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/LINE,NUMBER OF HITS=11,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN19_2    =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=11,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/LINE,NUMBER OF HITS=11,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN19_3    =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=11,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/LINE,NUMBER OF HITS=11,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN37_1    =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=9,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/LINE,NUMBER OF HITS=9,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN37_2    =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=10,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/LINE,NUMBER OF HITS=10,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN37_3    =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=11,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/LINE,NUMBER OF HITS=11,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
SCN38_1    =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=55,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/LINE,NUMBER OF HITS=55,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
            MOVE/CLEARPLANE
SCN38_2    =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=55,SHOW HITS=NO,SHOWALLPARAMS=NO
            MEAS/SCAN
              BASICSCAN/LINE,NUMBER OF HITS=55,SHOW HITS=NO,SHOWALLPARAMS=NO
              ENDSCAN
            ENDMEAS/
          
SCN36      =FEAT/SET,CARTESIAN
            THEO/<-11.745,-3.757,8.292>,<0,0,1>
            ACTL/<-11.808,-3.781,8.259>,<0,0,1>
            CONSTR/SET,BASIC,PNT11,PNT12,PNT13,PNT14,SCN1,SCN2,SCN3,SCN4,SCN5,SCN6,SCN7,SCN8,SCN9,SCN10,SCN11,SCN12,SCN13,SCN14,SCN15,SCN16,SCN17,PNT3,PNT4,PNT5,PNT6,SCN18,SCN19_1,SCN19_2,SCN19_3,SCN37_1,SCN37_2,SCN37_3,SCN38_1,SCN38_2,SCN38_3,$
                       SCN39_1,SCN39_2,SCN39_3,SCN40_1,SCN40_2,SCN40_3,SCN4_1,SCN4_1_1,SCN41_2,SCN41_3,PNT7,PNT8,PNT9,PNT10,SCN20,SCN22,SCN21,SCN23,SCN24,SCN25,SCN26,SCN27,SCN28,SCN29,SCN30,SCN31,SCN32,SCN33,SCN34,SCN35,,
            MOVE/CLEARPLANE
            MOVE/CLEARPOINT
            TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=-0.378
            ASSIGN/DATAOUT=PTNUM+"_Job_"+C3.INPUT+"_Cav_"+C1.INPUT+"_Part_"+C2.INPUT
            ASSIGN/PATHOUT="C:\Users\optiv.TRUELINE\Desktop\8932M Results\Results\PPAP-4-29-21\Split Line\\"+DATAOUT+"_"+SYSTEMDATE("MMddyy")+SYSTEMTIME("HHmm")+".XYZ"
COP1       =COP/DATA,TOTAL SIZE=2247,REDUCED SIZE=2247,
            FINDNOMS=NO,REF=SCN36,,
COPEXPORT1 =COP/OPER,EXPORT,FORMAT=XYZ,FILENAME=PATHOUT,
            SIZE=2247,REF=COP1,,