STARTUP    =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
            ALIGNMENT/END
            MODE/MANUAL
            FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, , 
            LOADPROBE/3MM_PROBE
            TIP/TIP1, SHANKIJK=0, 0, 1, ANGLE=0
PLN1       =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,OUTLINE,LEAST_SQR
            THEO/<6.8957,10.4796,0.06>,<0,0,1>
            ACTL/<34.76,-9.8582,0.3218>,<0.0007572,0.0047207,0.9999886>
            TARG/<6.8957,10.4796,0.06>,<0,0,1>
            ANGLE VEC=<-0.0697565,0,0.997564>,SQUARE
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=3,NUMROWS=3
              SPACER=0
            SHOW HITS=NO
PLN2       =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,OUTLINE,LEAST_SQR
            THEO/<7.1499,0.2717,1.9275>,<0,0.997564,0.0697565>
            ACTL/<34.4826,-18.6828,2.595>,<0.0135239,0.9981104,0.0599396>
            TARG/<7.1499,0.2717,1.9275>,<0,0.997564,0.0697565>
            ANGLE VEC=<-1,0,0>,SQUARE
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=3,NUMROWS=3
              SPACER=0
            SHOW HITS=NO
PLN3       =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,OUTLINE,LEAST_SQR
            THEO/<0.2286,3.4279,2.5438>,<0.997564,0,0.0697565>
            ACTL/<27.2153,-15.4537,2.6606>,<0.9976786,-0.0125026,0.0669414>
            TARG/<0.2286,3.4279,2.5438>,<0.997564,0,0.0697565>
            ANGLE VEC=<0.0697565,0,-0.997564>,SQUARE
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=2,NUMROWS=2
              SPACER=0
            SHOW HITS=NO
A1         =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
              ALIGNMENT/LEVEL,ZPLUS,PLN1
              ALIGNMENT/TRANS,ZAXIS,PLN1
              ALIGNMENT/ROTATE,YPLUS,TO,PLN2,ABOUT,ZPLUS
              ALIGNMENT/TRANS,YAXIS,PLN2
              ALIGNMENT/TRANS,XAXIS,PLN3
            ALIGNMENT/END
            DATDEF/FEATURE=PLN1,A
            DATDEF/FEATURE=PLN2,B
            DATDEF/FEATURE=PLN3,C
CIR1       =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<11.0664,-0.1784,3.2152>,<0,-0.9975641,-0.0697565>,0.75
            ACTL/<11.0465,-0.1748,3.1635>,<0,-0.997564,-0.0697565>,0.7468
            TARG/<11.0664,-0.1784,3.2152>,<0,-0.9975641,-0.0697565>
            START ANG=0,END ANG=360
            ANGLE VEC=<1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=3,DEPTH=0,PITCH=0
              SAMPLE METHOD=SAMPLE_FEATURE
              SAMPLE FEATURE=NONE
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=NO
FCFLOC1 =POSITION : CIR1
            FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
            CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=0.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=IN
            COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Datum Reference Frame
            CUSTOMIZED DRF=NO
            STANDARDTYPE=ASME_Y14_5
              SIZE TOLERANCES/1,DIAMETER,0.75,0.01,0.01
              PRIMARY DIMENSION/POSITION,DIAMETER,0.04,MMC,B,C,A
              SECONDARY DIMENSION/<Dim>,<tol>,<MC>,<dat>,<dat>,<dat>
              NOTE/FCFLOC1
            FEATURES/CIR1,,