If a Blueprint calls for ASME Y14.5 wouldn't this be the standard rules apply. How would I know if and when to apply ISO? I have yet to see anything on a blueprint stating this. The reason I bring this up is for the good old Profile callout. Before I make an argument, I want to cover all my resources. Customer already claims in an email that PC-DMIS is not capable of doing this. I and everyone on here already that's horse_S_H_I_T. But its Friday and I'm ready to P_I_S_S someone off
I just browsed thru the whole thread, and I still don't quiet understand is there an actual definition of how the profile is measured based on the y14.5-2009 or 1994???
is it double the worst reading or just the upper and lower combined?
Post #20 One actual hit in the positive and one actual in the negative. You cannot take one of those values and multiply it. That's what that says in the book. So you have one of 2 options add them together, or report highest reading and lowest reading
Post #20 One actual hit in the positive and one actual in the negative. You cannot take one of those values and multiply it. That's what that says in the book. So you have one of 2 options add them together, or report highest reading and lowest reading