Good Morning. Just informed we will be getting a mitutoyo cmm. Can Pc-Dmis be installed on this machine or is it still Geo Measure. Been 5 years since I used one and it was an old machine then.
Ken; This may or may not apply to you. I am running PC-DMIS v2015.1 on a Mitutoyo Bright -A504 with the Mit controller. Aside from the fact that these two do not play well together, there are two other issues. First problem is that my Mit controller will only work with a 32-bit computer (try finding a 32-bit computer). Second problem: PC-DMIS v2017 R1 is the last version that is supported to run 32-bit.
Good luck with your install, and as I stated, this may not be your situation.
Ken; This may or may not apply to you. I am running PC-DMIS v2015.1 on a Mitutoyo Bright -A504 with the Mit controller. Aside from the fact that these two do not play well together, there are two other issues. First problem is that my Mit controller will only work with a 32-bit computer (try finding a 32-bit computer). Second problem: PC-DMIS v2017 R1 is the last version that is supported to run 32-bit.
Good luck with your install, and as I stated, this may not be your situation.
