hexagon logo
Register Sign in
  • Replies 4 replies
  • Subscribers 17 subscribers
  • Views 77 views
  • Users 0 members are here
Options
Related

calibrating a vision system

bigtallanddopey
Our company has just bought a second hand vision CMM. It is basically a small (500mmx400mmx350mm) bridge style CMM with a camera on it. Not pcdmis or hexagon related at all.

We recently had the machine calibrated where the company (machine manufacturers - Baty) came in and calibrated it to there own standard. They also calibrated it using a small 50/60mm wide plaque with shapes on it at different positions on the cmm bed. All measurements apparently came out ok and they have provided a certificate.

The problem I have is that when I compare it to a touch trigger calibration they didn't check the measurement volume of the machine. There was no measurement from point X on one side of the machine to point Y at the other side like you would get when a KOBA bar is used. I know that 95% of the time we will only measure O rings etc, but if we were to measure a part with two holes in it that was 500mm long would we know that the measurement is accurate?

Has anyone got any experience with the calibration of vision systems on a CMM? is there an international standard that should be being followed?

Any answers would be great.

B,T & D
Parents
  • Hmm I see what you're asking. I will do my best, as I don't nor ever have worked for Hexagon, only watched them work.

    We have a "Hexagon Optical Calibration Standard", P/N 25-1234-02 on our calibration plate.

    They screw the plate in and perform a lot of measurements using native PC-DMIS on this standard; as to what they are doing, they have one or two specialists that work with mostly (or strictly) vision systems; I believe these one or two individuals would hold more information on what they do.
    I'm not exactly sure they'd be keen on giving out their secrets, but when someone is here to calibrate it they are quite informative...
    The man left his signature on the calibration cert; I can't legibly give you a name unfortunately...

    As for the latter, they have lasers and a bunch of other uber-cool measurement devices to calibrate; perhaps because of how the camera operates compared to a touch probe, there's no need for laser calibration, accounting for the size of pixels and such..
Reply
  • Hmm I see what you're asking. I will do my best, as I don't nor ever have worked for Hexagon, only watched them work.

    We have a "Hexagon Optical Calibration Standard", P/N 25-1234-02 on our calibration plate.

    They screw the plate in and perform a lot of measurements using native PC-DMIS on this standard; as to what they are doing, they have one or two specialists that work with mostly (or strictly) vision systems; I believe these one or two individuals would hold more information on what they do.
    I'm not exactly sure they'd be keen on giving out their secrets, but when someone is here to calibrate it they are quite informative...
    The man left his signature on the calibration cert; I can't legibly give you a name unfortunately...

    As for the latter, they have lasers and a bunch of other uber-cool measurement devices to calibrate; perhaps because of how the camera operates compared to a touch probe, there's no need for laser calibration, accounting for the size of pixels and such..
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement