my NJB is acting up (push e stop and light dosen't go off and other things). Does anyone know the part # for the connector going into the next jog box? I wish there was atleast some support going into the NJB.
A-machine-insp It wasn't hard almost like I had a head start from hexagon! That 90 that the cable does just cant be good. I heard that the cables are $$$$$. Wanted to see if I replaced the connector fixed the problem.
Yay Monday!
Change the holder so it holds it "upright". All that takes is loosening a couple screws and pivoting the holder. It will hang in there, and the magnet in the bottom half will hold it in the holder.
Matt it's acting like a wire is being pulled out. So wanted to redo the connector and maybe put a spring support on it to get rid of the 90 to the floor. You dont know what the part number is do you?
nope, mine is over 3 years old, still original. But that holder thing, maybe yours is different than mine. Mine is bolted down to the CMM table, and rotated up so it isn't a 'hard corner' for the cable, about 45 degrees.
I will be looking into that.
I'm still having problems with the NJB and I think it's the connector. Do you know what the part number is for that connector?
no, but if you have a REAL electronics store in town, and if they will let you borrow the cord for a trip to the store, they could probably hook you up real easy, both plugs and some cord, make it yourself.
They closed down Radio Shack about 6 years ago. So nothing here.
I remember awhile back someone posted the part number for the switch and light. The one under the the speed knob. Just hoping.
Looking at it looks like a 8 pin din connector. nothing special.