Wanting some advice on Alignment. I have a part with 5 straight in line holes, the top is a datum. The composite feature frame call for a TP .8 to AD, I created a line between all 5 holes then rotated to that line and set the axis on the datum
and to answer this question, Yes "X" and "Y" is "D" as you can see with the Basics, everything is tied into "D" which is sad, because I notice with the Basics saying "2X" That means it's controlling the other side of the part, with identical holes, The further you move away from your starting point, the more probability for error, not yours, just controlling the other holes not shown.
unless of course the other side is A|E or something like that.
and to answer this question, Yes "X" and "Y" is "D" as you can see with the Basics, everything is tied into "D" which is sad, because I notice with the Basics saying "2X" That means it's controlling the other side of the part, with identical holes, The further you move away from your starting point, the more probability for error, not yours, just controlling the other holes not shown.
unless of course the other side is A|E or something like that.
