hexagon logo
Register Sign in
  • Replies 29 replies
  • Subscribers 16 subscribers
  • Views 519 views
  • Users 0 members are here
Options
Related

Slope of lines: Created from points at Basic Diameters

wrangler325
Team,

I'm having trouble with Slope of lines created from points at Basic diameters. The picture shows 4 points ( E,F,G AND H ) all located on Basic diameters. The slope call out appears to be asking slope of each line to Datum -A-, which is the top plane, Z axis of part. I have taken these points at the specified basic diameters, created lines from these points, but the results are 0.297 inches. I know I'm doing something wrong.
Any help is appreciated. Will provide more info if needed.
Greg.




Slope issue picture.pdf
Parents
  • No, scan the two surfaces, this will create two scans. Do not create lines. Open up the line profile evaluation and select the two scans, set up the FCF as shown on drawing and hit "create" or "OK".

    I assume you have CAD and have clicked the surfaces in the graphics window to create the scan.
Reply
  • No, scan the two surfaces, this will create two scans. Do not create lines. Open up the line profile evaluation and select the two scans, set up the FCF as shown on drawing and hit "create" or "OK".

    I assume you have CAD and have clicked the surfaces in the graphics window to create the scan.
Children
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement