Rotating B inside a loop command

NICE! That was my next question about going beyond the 180 deg wall, thank you this is awsome.
We use a Tesastar-M I can go A90 and A-90, I use A-90 for better clearance on the head for it's design.

Actually the Tesastar M can go to A -115.

For me the challenge with the negative A tips is remembering that B is flipped 180 and will rotate the "wrong" way to get there.

Jec is correct -115 max on A, now I'm having mental block or just fried lol. But were do I insert the INCREMENTAL command? here is my code and thanks again.

ASSIGN/VANG = 35
V1 =LOOP/START, ID = YES, NUMBER = 4, START = 1, SKIP = ,
OFFSET: XAXIS = 0, YAXIS = 0, ZAXIS = 0, ANGLE = 36
ASSIGN/TIPSTR = STR("T1A-90B")+VANG
CIR A =FEAT/CONTACT/CIRCLE,CARTESIAN,IN,LEAST_SQR
THEO/<0,-1.4987,-1.115>,<0,-1,0>,0.125,0,360
ACTL/<0,-1.4987,-1.115>,<0,-1,0>,0.125,0,360
TARG/<0,-1.4987,-1.115>,<0,-1,0>
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW ADVANCED MEASUREMENT OPTIONS=NO
SHOW_CONTACT_PARAMETERS=YES
NUMHITS=3,DEPTH=0.04,PITCH=0
SAMPLE HITS=0,SPACER=0
AVOIDANCE MOVE=BOTH,DISTANCE=0.65
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOWHITS=NO
TIP/TIPSTR, SHANKIJK=0.5299, -0.848, 0, ANGLE=90
ASSIGN/VANG = VANG+35
IF/VANG>180
ASSIGN/VANG = 360-VANG
END_IF/
IF/VANG<-180
ASSIGN/VANG = 360+VANG
END_IF/
LOOP/END

I would place all the assignments and assignment coding at the very end, right before LOOP/END.

Makes it easier to debug/work out if excrements should hit the rotating blades.