Your Products have been synced, click here to refresh
I am questioning something with the plane4 spec that I want to pull out. Now, If I pull it out as a feature and the MEAS_Z command, I get about 1/2 of the whole reading which should be .51. Now this part has a step in it that goes from the bottom to .25. The measurement I get out of PCDMIS is enough to add in that .25 step and come up with that .51 as a whole.
So my question is, is this a common thing with PCDMIS, or is this dependent on how whoever programmed this part into the system?
I am questioning something with the plane4 spec that I want to pull out. Now, If I pull it out as a feature and the MEAS_Z command, I get about 1/2 of the whole reading which should be .51. Now this part has a step in it that goes from the bottom to .25. The measurement I get out of PCDMIS is enough to add in that .25 step and come up with that .51 as a whole.
So my question is, is this a common thing with PCDMIS, or is this dependent on how whoever programmed this part into the system?
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |