Your Products have been synced, click here to refresh
ASSIGN/MDEPTH=.125 REMEAS1 =LABEL/ CIR1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<-1.0273,0.95,-0.5218>,<0,0,-1>,0.776 ACTL/<-1.0273,0.95,-0.5218>,<0,0,-1>,0.78 TARG/<-1.0273,0.95,-0.5218>,<0,0,-1> START ANG=0,END ANG=360 ANGLE VEC=<-1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=7,DEPTH=MDEPTH,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=3,SPACER=0 AVOIDANCE MOVE=NO,DISTANCE=0.3937 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO IF/ABS(CIR1.D-CIR1.TD)>.005 IF_GOTO/MDEPTH==.375,GOTO = SKIP1 ASSIGN/MDEPTH=.375 GOTO/REMEAS1 END_IF/ SKIP1 =LABEL/
I am trying to figure out a way to automatically mark or unmark feature dimensions that are out of tolerance.
I have a program that includes some if/then statements where it re-measures a diameter at a different depth if the first one is OOT.
So my problem is that in the reporting portion of the program, I want the program to only reflect the in tolerance measurement and not the failed measurements.
I can post the code if it helps.
I am slightly familiar with using vb scripts.
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |