hexagon logo
Register Sign in
  • Replies 21 replies
  • Subscribers 31 subscribers
  • Views 523 views
  • Users 0 members are here
Options
Related

Using all Scanned points to create a Plane

KIRBSTER269
Ok usually I make alot of single points to make a plane from a bottom side, to create a plane, but I need to be a lot more precise in this situation. So I have created 2 Plane Adaptive Scans and I want to combine the 2 for flatness. Now since it's a scan, one is 140 points, the other 151 points, is there an easy way to extract them to create a plane? I know how to extract all the points, or at least when I hover over it, it shows all the point results. But When I plug this into a Generic Plane not so good. Maybe I'm going down the wrong path. , or , or or

ASSIGN/V1=PLN_A1.HIT[1..140].Z
ASSIGN/V2=PLN_A2.HIT[1..151].Z
Parents
  • Create a feature set with the two scans.

    Once the feature set is in your edit window, you will have to do some hard coding.

    PLN_A1.HIT[1..PLN_A1.NUMHITS] .Z
    PLN_A2.HIT[1..PLN_A2.NUMHITS] .Z

    ^^Thats what you have to hardcore the feature set inputs to look like.

    Make the plane out of the feature set

    Should be good from there

    Don't it need a .Z at the end?
Reply
  • Create a feature set with the two scans.

    Once the feature set is in your edit window, you will have to do some hard coding.

    PLN_A1.HIT[1..PLN_A1.NUMHITS] .Z
    PLN_A2.HIT[1..PLN_A2.NUMHITS] .Z

    ^^Thats what you have to hardcore the feature set inputs to look like.

    Make the plane out of the feature set

    Should be good from there

    Don't it need a .Z at the end?
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement