Find max, min dia for 'N' numbers of holes

we are using following code to find max and min dia among 93 holes inspected
can someone suggest any alternate way?

ASSIGN/COUNT=0
ASSIGN/NUM_OF_DIM=93
ASSIGN/MMPROF1=0
ASSIGN/MMPROF2=0
ASSIGN/MAX_DIM=0
ASSIGN/MIN_DIM=0
ASSIGN/MAX_PROF=0
ASSIGN/MIN_PROF=0
DO/
ASSIGN/COUNT=COUNT+1
ASSIGN/ID="LOC"+COUNT
ASSIGN/MMPROF1[COUNT]=ID.D.MEAS
ASSIGN/MMPROF2[COUNT]=MMPROF1[COUNT]
UNTIL/COUNT==NUM_OF_DIM
ASSIGN/MAX_DIM=MAXINDEX(MMPROF2)
ASSIGN/MIN_DIM=MININDEX(MMPROF2)
ASSIGN/MAX_PROF=MMPROF2[MAX_DIM]
ASSIGN/MIN_PROF=MMPROF2[MIN_DIM]
F1 =GENERIC/POINT,DEPENDENT,CARTESIAN,$
NOM/XYZ,<1,0,0>,$
MEAS/XYZ,<MAX_PROF,0,0>,$
NOM/IJK,<0,0,1>,$
MEAS/IJK,<0,0,1>
DIM LOC94= LOCATION OF POINT F1 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
X 1.0000 0.0200 0.0200 1.0000 0.0000 0.0000 --#--
END OF DIMENSION LOC94
F2 =GENERIC/POINT,DEPENDENT,CARTESIAN,$
NOM/XYZ,<1,0,0>,$
MEAS/XYZ,<MIN_PROF,0,0>,$
NOM/IJK,<0,0,1>,$
MEAS/IJK,<0,0,1>
DIM LOC95= LOCATION OF POINT F2 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
X 1.0000 0.0200 0.0200 1.0000 0.0000 0.0000 --#--
END OF DIMENSION LOC95

Parents

Henniger123 over 2 years ago

Do you know if this will work for the GeoMeas true positions? We are using 2021.2 right now.

good Day,

if you have one feature in your "GeoMeas true positions" than this works like this:

FCFLOC1 =GEOMETRIC_TOLERANCE/STANDARD=ISO 1101,SHOWEXPANDED=NO,
SIZE/NOMINAL=45,TOLERANCE SPECIFICATION MODE=NOMINAL_WITH_DEVIATIONS,
UPPER TOLERANCE=0.1,LOWER TOLERANCE=-0.1,
SEGMENT_1,POSITION,DIAMETER,0.1,__,A,B,C,
ADD
FEATURES/D_45P7_1,,

FCFLOC2 =GEOMETRIC_TOLERANCE/STANDARD=ISO 1101,SHOWEXPANDED=NO,
SIZE/NOMINAL=45,TOLERANCE SPECIFICATION MODE=NOMINAL_WITH_DEVIATIONS,
UPPER TOLERANCE=0.1,LOWER TOLERANCE=-0.1,
SEGMENT_1,POSITION,DIAMETER,0.1,__,A,B,C,
ADD
FEATURES/D_45P7_2,,

FCFLOC3 =GEOMETRIC_TOLERANCE/STANDARD=ISO 1101,SHOWEXPANDED=NO,
SIZE/NOMINAL=45,TOLERANCE SPECIFICATION MODE=NOMINAL_WITH_DEVIATIONS,
UPPER TOLERANCE=0.1,LOWER TOLERANCE=-0.1,
SEGMENT_1,POSITION,DIAMETER,0.1,__,A,B,C,
ADD
FEATURES/D_45P7_3,,

V1 =LOOP/START,ID=YES,NUMBER=3,START=1,SKIP=,
OFFSET:XAXIS=0,YAXIS=0,ZAXIS=0,ANGLE=0

  ASSIGN/V2="FCFLOC"+V1
  ASSIGN/V3[V1]=V2.SEGMENT[1].FEATURE[1].MEAS

LOOP/END

ASSIGN/VMAX=V3[MAXINDEX(V3)]
ASSIGN/VMIN=V3[MININDEX(V3)]

be advised that this not work if you have multi features in one "GeoMeas true positions"
because you have to go trougth each .FEATURE[n ]
this can only be archived with two loops

i dont know the key word that gives me the count for .FEATURE[n ] at the moment,
maybe someone knows it and can add the second loop to this example

Reply

Henniger123 over 2 years ago

Do you know if this will work for the GeoMeas true positions? We are using 2021.2 right now.

good Day,

if you have one feature in your "GeoMeas true positions" than this works like this:

FCFLOC1 =GEOMETRIC_TOLERANCE/STANDARD=ISO 1101,SHOWEXPANDED=NO,
SIZE/NOMINAL=45,TOLERANCE SPECIFICATION MODE=NOMINAL_WITH_DEVIATIONS,
UPPER TOLERANCE=0.1,LOWER TOLERANCE=-0.1,
SEGMENT_1,POSITION,DIAMETER,0.1,__,A,B,C,
ADD
FEATURES/D_45P7_1,,

FCFLOC2 =GEOMETRIC_TOLERANCE/STANDARD=ISO 1101,SHOWEXPANDED=NO,
SIZE/NOMINAL=45,TOLERANCE SPECIFICATION MODE=NOMINAL_WITH_DEVIATIONS,
UPPER TOLERANCE=0.1,LOWER TOLERANCE=-0.1,
SEGMENT_1,POSITION,DIAMETER,0.1,__,A,B,C,
ADD
FEATURES/D_45P7_2,,

FCFLOC3 =GEOMETRIC_TOLERANCE/STANDARD=ISO 1101,SHOWEXPANDED=NO,
SIZE/NOMINAL=45,TOLERANCE SPECIFICATION MODE=NOMINAL_WITH_DEVIATIONS,
UPPER TOLERANCE=0.1,LOWER TOLERANCE=-0.1,
SEGMENT_1,POSITION,DIAMETER,0.1,__,A,B,C,
ADD
FEATURES/D_45P7_3,,

V1 =LOOP/START,ID=YES,NUMBER=3,START=1,SKIP=,
OFFSET:XAXIS=0,YAXIS=0,ZAXIS=0,ANGLE=0

  ASSIGN/V2="FCFLOC"+V1
  ASSIGN/V3[V1]=V2.SEGMENT[1].FEATURE[1].MEAS

LOOP/END

ASSIGN/VMAX=V3[MAXINDEX(V3)]
ASSIGN/VMIN=V3[MININDEX(V3)]

Children

No Data