hexagon logo
Register Sign in
  • Replies 5 replies
  • Subscribers 30 subscribers
  • Views 156 views
  • Users 0 members are here
Options
Related

Help, something happened to my program

GabenX
Hi,
Idk if this is the right placce to my problem... But I try. So one of my latest program won't work properly. Somewhere in the middle, there's a measured point, and all the program continues inside that element.


I tried to edit the program different ways, but it seems not possible, because none of the further elements has the "END OF MEASUREMENT/" line :/

I tried to delete the program until is seems good, but no matter how much I delete, can't move the cursor to the last line so I can't continue a proper programming. Other thing is, after the delete if I try to insert a size before the last one, and delete the last one, the program dies...


Any ideas how to make it work properly again?

Parents
  • Hello,

    I think you can try the following

    1.) please try this:
    open a new empty program,
    and copy the broken places into the new program, but command by command, maybe you can mark them correctly with [ctrl->left click]. Start with the last one
    if it looks good in the new program, copy it back into the actual program.

    2.) try to copy the damaged areas with a pattern offset (just copy with no shifting or rotation so that the new names are created)

    3.) delete all the bad parts and rewrite them

    4.) delete the whole program and make it completely new

    This is an error in the internal composition of the measurement program,
    the reasons for this can be varied and can no longer be reconstructed.

    I'm afraid you'll have to cut it out like cancer​
Reply
  • Hello,

    I think you can try the following

    1.) please try this:
    open a new empty program,
    and copy the broken places into the new program, but command by command, maybe you can mark them correctly with [ctrl->left click]. Start with the last one
    if it looks good in the new program, copy it back into the actual program.

    2.) try to copy the damaged areas with a pattern offset (just copy with no shifting or rotation so that the new names are created)

    3.) delete all the bad parts and rewrite them

    4.) delete the whole program and make it completely new

    This is an error in the internal composition of the measurement program,
    the reasons for this can be varied and can no longer be reconstructed.

    I'm afraid you'll have to cut it out like cancer​
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement