PT501 =FEAT/POINT,CARTESIAN
THEO/<39.8049,-1.2775,-1.5851>,<0.5235208,0.8519339,0.0116005>
ACTL/<39.8049,-1.2775,-1.5851>,<0.5235208,0.8519339,0.0116005>
MEAS/POINT,1,WORKPLANE
HIT/BASIC,NORMAL,<39.8049,-1.2775,-1.5851>,<0.5235208,0.8519339,0.0116005>,<39.8049,-1.2775,-1.5851>,USE THEO=YES
ENDMEAS/
DIM D501= LOCATION OF POINT PT501 SD=0.0000 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX MEAS NOMINAL +TOL -TOL DEV OUTTOL
X 39.8049 39.8049 0.0150 0.0150 0.0000 0.0000 ----#----
Y -1.2775 -1.2775 0.0150 0.0150 0.0000 0.0000 ----#----
Z -1.5851 -1.5851 0.0150 0.0150 0.0000 0.0000 ----#----
T 0.0000 0.0000 0.0150 0.0150 0.0000 0.0000 ----#----
END OF DIMENSION D501
PT501 is a DMIS point, not a PCDMIS vector or surface point.
Have to leave them in program and not convert to a PCDMIS point.
I have a script the tests if a Cmd is a feature.
IF Cmd.IsFeature THen
Count = Count + 1.
PT501 is detected as a feature,
but the Cmd.IsFeature is detecting another feature incrementing
the counter when I don't want it incremented.
Would it be the MEAS/POINT,1/WORKPLANE that is considered
a feature and how would I test for that and not have the counter
incremented?
Hope that makes sense!
