hexagon logo
Register Sign in
  • State Verified Answer
  • Replies 12 replies
  • Subscribers 32 subscribers
  • Views 854 views
  • Users 0 members are here
Options
Related

help：Using scripts to acquire FCF data

Eenny0916

该脚本能够输出FCF数据；然而，作为一名质量控制专业人员，我不熟悉如何修改其代码以确保其输出完整的内容，包括位置公差、轮廓公差和XY信息。帮助。

谢谢。

Parents
  • 0

    I'd personally make a user defined type for each class of feature which includes all the parameters you might ever have to check, and loop through that type for each feature. But your question is somewhat vague.

  • 0 in reply to Ed K

    I want to run the FCF data script that was completed and exported according to the report. This was written by a friend in the community, and I used it as a reference, but I can't do it myself.Do you have it?

  • 0 in reply to Eenny0916

    Hey Eenny, when you run the script, what does your data look like when created in Excel? I think all of the FCF data is already in the report, but formatted incorrectly and want to verify with your data.

    I believe I didn't need to change much or anything at all.

  • 0 in reply to WilliamL

    Yes, I am currently verifying that the 2023 version can implement the FCF data format. Upon returning to the branch office, the 2017 low-version cannot use the output value. Please help!

  • 0 in reply to Eenny0916

    Do you mean "the 2017 low-version" to be PC-DMIS 2017? And this script will not run on that version?

  • 0 in reply to WilliamL

    Yes, the value in XYZ cannot be obtained in PCDMIS2017.

  • 0 in reply to Eenny0916

    In PCDMIS 2017 for the script, you will need to remove the GeoTol portion of the script I believe. Since GeoTol did not exist until 2020. Can you show me a sample of the excel file created for you?

  • 0 in reply to WilliamL

    Yes, the following is the data output from PC-DMIS-2023 version:

     the following is the data output from PC-DMIS-2017 version:

    As you said, the answer is correct, but now I want to output the theoretical value, but Theo_x is not effective. Why?

  • +1 in reply to Eenny0916

    THEO_X, THEO_Y, and THEO_Z worked for me. I used PCDMIS 2018 R2, as I do not have 2017 to check specifically for your version.

    There is a lot of random formatting things I was testing, but the important things for you are the portions of the code in the Case 2 FCF Block

    Sub Main()
  ' writes Dimension-data To excel sheet
  ' the excel sheet must be saved manually
  
  ' Dim Something
    Dim pcDMISApp As Object
    Set pcDMISApp = CreateObject("PCDLRN.Application")
    Dim pcDMISPart As Object
    Set pcDMISPart = pcDMISApp.ActivePartProgram
    Dim pcDMISCmds As Object
    Set pcDMISCmds = pcDMISPart.Commands
    Dim pcDMISCmd As Object
    Dim pcDMISDIMCmd As Object
  
    Dim objExcel As Object
    Dim objNewBook As Object
    
    Set objExcel = CreateObject("Excel.Application")
    Set objNewBook = objExcel.Workbooks.Add
    
    Dim sPath, sTemp, sTemp2 As String
    Dim iRowCount, iIndex, iType As Integer
    Dim dMeas, dTol, dMin, dMax, dDev, dNominal As Double

  ' Write excel heading
    objExcel.ScreenUpdating = False
    objNewBook.Sheets(1).Cells(1, 1).Value = "ID"
    objNewBook.Sheets(1).Cells(1, 2).Value = "Ref"
    objNewBook.Sheets(1).Cells(1, 3).Value = "AxisLetter"
    objNewBook.Sheets(1).Cells(1, 4).Value = "Nominal"    
    objNewBook.Sheets(1).Cells(1, 5).Value = "Measured"
    objNewBook.Sheets(1).Cells(1, 6).Value = "Plus"
    objNewBook.Sheets(1).Cells(1, 7).Value = "Minus"
    objNewBook.Sheets(1).Cells(1, 8).Value = "OutTol"
    objNewBook.Sheets(1).Cells(1, 9).Value = "Length"
    objNewBook.Sheets(1).Cells(1, 10).Value = "Deviation"
    objNewBook.Sheets(1).Cells(1, 11).Value = "Max"
    objNewBook.Sheets(1).Cells(1, 12).Value = "Min"
    objNewBook.Sheets(1).Cells(1, 13).Value = "Theo X"
    objNewBook.Sheets(1).Cells(1, 14).Value = "Theo Y"
    objNewBook.Sheets(1).Cells(1, 15).Value = "Theo Z"
    objNewBook.Sheets(1).Cells(1, 16).Value = "Meas X"
    objNewBook.Sheets(1).Cells(1, 17).Value = "Meas Y"
    objNewBook.Sheets(1).Cells(1, 18).Value = "Meas Z"
    objNewBook.Sheets(1).Cells(1, 19).Value = "Bonus"
    objNewBook.Sheets(1).Cells(1, 20).Value = "Units"
    objNewBook.Sheets(1).Cells(1, 21).Value = "Standard"
    

    objNewBook.Sheets(1).Range("C2:S500").NumberFormat = "0.0000"
    objNewBook.Sheets(1).Columns.ColumnWidth = 10

  ' search pcDMIS For Dimension command
    iRowCount = 2
    For Each pcDMISCmd In pcDMISCmds
      ' ### Get Command Type ###################################################
        iType = -1
        If (pcDMISCmd.IsDimension) Then iType = 1
        If (pcDMISCmd.Type = FEATURE_CONTROL_FRAME) Then iType = 2
        If (pcDMISCmd.Type = ISO_TOLERANCE_COMMAND) Or (pcDMISCmd.Type = ASME_TOLERANCE_COMMAND) Then iType = 3
        If (pcDMISCmd.Type = ISO_SIZE_COMMAND) Or (pcDMISCmd.Type = ASME_SIZE_COMMAND) Then iType = 4
        If iType = -1 Then GoTo nextLoopIndex
      
      ' ### Select Type ###################################################
        Select Case iType
          Case 1 'Dimension
              If pcDMISCmd.Type = DATDEF_COMMAND Then GoTo nextLoopIndex
              If pcDMISCmd.GetText(ID, 0) <> "" Then
                If (pcDMISCmd.GetText(REF_ID, 2) <> pcDMISCmd.GetText(REF_ID, 1)) Then
                  sTemp = pcDMISCmd.GetText(ID, 0)
                  sTemp2 = pcDMISCmd.GetText(REF_ID, 1) + "; " + pcDMISCmd.GetText(REF_ID, 2)
                Else
                  sTemp = pcDMISCmd.GetText(ID, 0)
                  sTemp2 = pcDMISCmd.GetText(REF_ID, 0)
                End If
              End If

              If pcDMISCmd.Type = DIMENSION_START_LOCATION Then GoTo nextLoopIndex
              If pcDMISCmd.Type = DIMENSION_END_LOCATION Then GoTo nextLoopIndex
              If pcDMISCmd.Type = DIMENSION_START_LOCATION Then
                sTemp = pcDMISCmd.GetText(ID, 0)
                sTemp2 = pcDMISCmd.GetText(REF_ID, 0)
                GoTo nextLoopIndex
              End If
              
            ' Get DimensionCommand
              Set pcDMISDIMCmd = pcDMISCmd.DimensionCommand
          
            ' Write DimensionCommand data To Excel
              objNewBook.Sheets(1).Cells(iRowCount, 1).Value = sTemp 'ID
              objNewBook.Sheets(1).Cells(iRowCount, 2).Value = sTemp2 'ref-Feature ID
              objNewBook.Sheets(1).Cells(iRowCount, 3).Value = pcDMISDIMCmd.AxisLetter
              objNewBook.Sheets(1).Cells(iRowCount, 4).Value = pcDMISDIMCmd.Nominal
              objNewBook.Sheets(1).Cells(iRowCount, 5).Value = pcDMISDIMCmd.Measured
              objNewBook.Sheets(1).Cells(iRowCount, 6).Value = pcDMISDIMCmd.Plus
              objNewBook.Sheets(1).Cells(iRowCount, 7).Value = pcDMISDIMCmd.Minus
              objNewBook.Sheets(1).Cells(iRowCount, 8).Value = pcDMISDIMCmd.OutTol
              objNewBook.Sheets(1).Cells(iRowCount, 9).Value = pcDMISDIMCmd.Length
              objNewBook.Sheets(1).Cells(iRowCount, 10).Value = pcDMISDIMCmd.Deviation
              objNewBook.Sheets(1).Cells(iRowCount, 11).Value = pcDMISDIMCmd.Max
              objNewBook.Sheets(1).Cells(iRowCount, 12).Value = pcDMISDIMCmd.Min
              objNewBook.Sheets(1).Cells(iRowCount, 16).Value = pcDMISDIMCmd.Bonus
              If pcDMISDIMCmd.Units = 1 Then
                objNewBook.Sheets(1).Cells(iRowCount, 17).Value = "MM"
              Else
                objNewBook.Sheets(1).Cells(iRowCount, 17).Value = "INCH"
              End If
              objNewBook.Sheets(1).Cells(iRowCount, 18).Value = ""
              
            ' new Excel row
              iRowCount = iRowCount + 1
              
          Case 2 'FCF
            ' Write ExMeas-Command data To Excel
              iIndex = 1
              sTemp = pcDMISCmd.GetText(LINE2_FEATNAME, iIndex)
              Do While sTemp <> ""
            
                dMeas = pcDMISCmd.GetText(LINE2_MEAS, iIndex)
                dNominal = pcDMISCmd.GetText(LINE2_NOMINAL, iIndex)
                
               



                objNewBook.Sheets(1).Cells(iRowCount, 1).Value = pcDMISCmd.ID
                objNewBook.Sheets(1).Cells(iRowCount, 2).Value = sTemp
                objNewBook.Sheets(1).Cells(iRowCount, 3).Value = "FCF"  'AxisLetter
                objNewBook.Sheets(1).Cells(iRowCount, 4).Value = dNominal 'Nominal
                objNewBook.Sheets(1).Cells(iRowCount, 5).Value = dMeas 'Measured
                objNewBook.Sheets(1).Cells(iRowCount, 6).Value = pcDMISCmd.GetText(LINE2_PLUSTOL, iIndex)   'Plus
                objNewBook.Sheets(1).Cells(iRowCount, 7).Value = pcDMISCmd.GetText(LINE2_MINUSTOL, iIndex)  'Minus
                objNewBook.Sheets(1).Cells(iRowCount, 8).Value = pcDMISCmd.GetText(LINE2_OUTTOL, iIndex)  'OutTol
                objNewBook.Sheets(1).Cells(iRowCount, 9).Value = pcDMISCmd.GetText(MEAS_LENGTH, iIndex)   'Length
                objNewBook.Sheets(1).Cells(iRowCount, 10).Value = pcDMISCmd.GetText(LINE2_DEV, iIndex) 'Deviation
                objNewBook.Sheets(1).Cells(iRowCount, 11).Value = pcDMISCmd.GetText(LINE2_MAX, iIndex)'Max
                objNewBook.Sheets(1).Cells(iRowCount, 12).Value = pcDMISCmd.GetText(LINE2_MIN, iIndex) 'Min
                objNewBook.Sheets(1).Cells(iRowCount, 13).Value = pcDMISCmd.GetText(THEO_X, iIndex)  'Theoretical X VALUE
                objNewBook.Sheets(1).Cells(iRowCount, 14).Value = pcDMISCmd.GetText(THEO_Y, iIndex)  'Theoretical Y VALUE
                objNewBook.Sheets(1).Cells(iRowCount, 15).Value = pcDMISCmd.GetText(THEO_Z, iIndex)  'Theoretical Z VALUE                
                objNewBook.Sheets(1).Cells(iRowCount, 16).Value = pcDMISCmd.GetText(MEAS_X, iIndex)  'X VALUE                
                objNewBook.Sheets(1).Cells(iRowCount, 17).Value = pcDMISCmd.GetText(MEAS_Y, iIndex)  'Y VALUE                
                objNewBook.Sheets(1).Cells(iRowCount, 18).Value = pcDMISCmd.GetText(MEAS_Z, iIndex)  'Z VALUE
                objNewBook.Sheets(1).Cells(iRowCount, 19).Value = pcDMISCmd.GetText(LINE2_BONUS, iIndex)  'Bonus
                objNewBook.Sheets(1).Cells(iRowCount, 20).Value = pcDMISCmd.GetText(UNIT_TYPE, 0)  'Units
                objNewBook.Sheets(1).Cells(iRowCount, 21).Value = pcDMISCmd.GetText(STANDARD, 0)
                
                
          
              ' new GeoTol Row
                iIndex = iIndex + 1
                sTemp = pcDMISCmd.GetText(LINE2_FEATNAME, iIndex)
                
              ' new Excel row
                iRowCount = iRowCount + 1
              Loop
              
          Case 3 'GEO
            ' Write GeoTol-Command data To Excel
              iIndex = 1
              sTemp = pcDMISCmd.GetText(REF_ID, iIndex)
              Do While sTemp <> ""
                objNewBook.Sheets(1).Cells(iRowCount, 1).Value = pcDMISCmd.ID
                objNewBook.Sheets(1).Cells(iRowCount, 2).Value = sTemp
                objNewBook.Sheets(1).Cells(iRowCount, 3).Value = "GEO"  'AxisLetter
          
                dTol = pcDMISCmd.GetText(FORM_TOLERANCE, 1)
                dMeas = pcDMISCmd.GetTextEx(DIM_DEVIATION, iIndex, "SEG=1")

                objNewBook.Sheets(1).Cells(iRowCount, 4).Value = 0    'Nominal
                objNewBook.Sheets(1).Cells(iRowCount, 5).Value = dMeas  'Measured
                objNewBook.Sheets(1).Cells(iRowCount, 6).Value = dTol   'Plus
                objNewBook.Sheets(1).Cells(iRowCount, 7).Value = 0  'Minus
                If dMeas > dTol Then
                  objNewBook.Sheets(1).Cells(iRowCount, 8).Value = dTol - dMeas  'OutTol
                Else
                  objNewBook.Sheets(1).Cells(iRowCount, 8).Value = 0  'OutTol
                End If
                objNewBook.Sheets(1).Cells(iRowCount, 9).Value = 0   'Length
                objNewBook.Sheets(1).Cells(iRowCount, 10).Value = dMeas  'Deviation
                objNewBook.Sheets(1).Cells(iRowCount, 11).Value = 0  'Max
                objNewBook.Sheets(1).Cells(iRowCount, 12).Value = 0  'Min
                objNewBook.Sheets(1).Cells(iRowCount, 13).Value = pcDMISCmd.GetTextEx(MEAS_X, iIndex, "SEG=1")  'X VALUE
	            objNewBook.Sheets(1).Cells(iRowCount, 14).Value = pcDMISCmd.GetTextEx(MEAS_Y, iIndex, "SEG=1")  'Y VALUE
                objNewBook.Sheets(1).Cells(iRowCount, 15).Value = pcDMISCmd.GetTextEx(MEAS_Y, iIndex, "SEG=1")  'Z VALUE
                objNewBook.Sheets(1).Cells(iRowCount, 16).Value = pcDMISCmd.GetTextEx(DIM_BONUS, iIndex, "SEG=1")  'Bonus
                objNewBook.Sheets(1).Cells(iRowCount, 17).Value = pcDMISCmd.GetText(UNIT_TYPE, 0)   'Units
                objNewBook.Sheets(1).Cells(iRowCount, 18).Value = pcDMISCmd.GetText(STANDARD, 0)   'STANDARD
          
              ' new GeoTol Row
                iIndex = iIndex + 1
                sTemp = pcDMISCmd.GetText(REF_ID, iIndex)
                
              ' new Excel row
                iRowCount = iRowCount + 1
              Loop
              
          Case 4 'Size
            ' Write ToleranceCommand data To Excel
              objNewBook.Sheets(1).Cells(iRowCount, 1).Value = pcDMISCmd.GetText(ID, 0)
              objNewBook.Sheets(1).Cells(iRowCount, 2).Value = pcDMISCmd.GetText(REF_ID, 0)
              objNewBook.Sheets(1).Cells(iRowCount, 3).Value = "SIZE"          
              objNewBook.Sheets(1).Cells(iRowCount, 4).Value = pcDMISCmd.GetText(Nominal, 0)   'Nominal
              objNewBook.Sheets(1).Cells(iRowCount, 5).Value = CDbl(pcDMISCmd.GetText(Nominal, 0)) + CDbl(pcDMISCmd.GetText(DIM_DEVIATION, 0)) 'Measured
              objNewBook.Sheets(1).Cells(iRowCount, 6).Value = pcDMISCmd.GetText(UPPER_TOLERANCE, 0)   'Plus
              objNewBook.Sheets(1).Cells(iRowCount, 7).Value = pcDMISCmd.GetText(LOWER_TOLERANCE, 0)  'Minus
              objNewBook.Sheets(1).Cells(iRowCount, 8).Value = 0    'OutTol
              objNewBook.Sheets(1).Cells(iRowCount, 9).Value = 0   'Length
              objNewBook.Sheets(1).Cells(iRowCount, 10).Value = pcDMISCmd.GetText(DIM_DEVIATION, 0)  'Deviation
              objNewBook.Sheets(1).Cells(iRowCount, 11).Value = 0  'Max
              objNewBook.Sheets(1).Cells(iRowCount, 12).Value = 0  'Min
              objNewBook.Sheets(1).Cells(iRowCount, 16).Value = 0  'Bonus
              objNewBook.Sheets(1).Cells(iRowCount, 17).Value = pcDMISCmd.GetText(UNIT_TYPE, 0) 'Units
              objNewBook.Sheets(1).Cells(iRowCount, 18).Value = pcDMISCmd.GetText(STANDARD, 0)
          
            ' new Excel row
              iRowCount = iRowCount + 1
              
        End Select
      
nextLoopIndex:
    Next pcDMISCmd
    
    

    
  ' Close excel
    objExcel.ScreenUpdating = True
    objExcel.Visible = True
    sPath = "C:\CMM\TEST.XLSX"
    'objNewBook.SaveAs sPath
    'objExcel.Quit

  ' unDim Something
    Set objNewBook = Nothing
    Set objExcel = Nothing
    Set pcDMISCmd = Nothing
    Set pcDMISCmds = Nothing
    Set pcDMISPart = Nothing
    Set pcDMISApp = Nothing
End Sub

Reply Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement