The Error: ALT Sterilization error is a corruption of your part program.
When ever PC-DMIS opens a program it is also writing new data (Last Measurement Information) to it. If a windows application crash happen the program may not get closed properly or only part of the information was written to the part program. Another cause of the sterilization error is using a earlier version of PCDMIS to open a program that was written in a later version.
Example Write a program in 3.7mr2, Open that program in 4.2, try to open again in 3.7 mr2 you will most likely get a sterilization error.
When ever you use the file/close command within PCDMIS the program that is open will be re-written out to the Hard drive. The file/Quit does not re-write the program.
Software using Pcdmis 4.2 cad++
Machine: Global 2002
Probe head controller PHC 10-2
PH10MQ TP20
Compaq Hard drive windows XP service pack 2
The Error: ALT Sterilization error is a corruption of your part program.
When ever PC-DMIS opens a program it is also writing new data (Last Measurement Information) to it. If a windows application crash happen the program may not get closed properly or only part of the information was written to the part program. Another cause of the sterilization error is using a earlier version of PCDMIS to open a program that was written in a later version.
Example Write a program in 3.7mr2, Open that program in 4.2, try to open again in 3.7 mr2 you will most likely get a sterilization error.
When ever you use the file/close command within PCDMIS the program that is open will be re-written out to the Hard drive. The file/Quit does not re-write the program.
Software using Pcdmis 4.2 cad++
Machine: Global 2002
Probe head controller PHC 10-2
PH10MQ TP20
Compaq Hard drive windows XP service pack 2