hexagon logo

Report Editing

Hello everyone, I am trying to modify the Text only template for 2010 MR3 and am having little success. I have read the help files and although they are fairly helpful on the process of modifying labels, they seem to be lacking the specifics needed. (that or I'm just not seeing them) Here is what I'm trying to do;

1) The default template for a measured profile (form and position) outputs the measured vector points listed under "HITS" as numbers 1,2,3,4.ect (see pict)  . I need for the numbers under the "HITS" column to state the feature name of the vector points measured.

2) When True Position of multiple holes are measured as a set to the same datums the default template outputs each holes measured geometric position in the first box, and in the second box gives the XYZ coordinates of the holes as a set the individually (see pict).  I need to remove the "SET" along with its values leaving just the individual hole XYZ coordinates.

I would appreciate any help offered.

JMAC
Parents
  •  So the =Ref_ID:N worked! Thanks for your help.
    Now My Customer wants to add an OUTTOL Column to the TEXTUALANALISYS.LBL. I have been playing with the label and copied the =LOADSTR() From LINE2.LBL and it populated the Title "OUTTOL" correctly but I am not having any luck with the Cell Expression. All of the examples I see have the +TOL_ and -TOL and are using them along with the DEV in order to get the OUTTOL to populate correctly. I have tried to ad them to the TEXTUALANALISYS.LBL that I have modified but am not having any luck because they dont have a tolerance defined as they are just vector points. I think there has to be a way to calculate the OUTTOL using the LINE2.LBL (contains the Geometric measurements defigned by the FCF) used in conjunction with the TEXTUALANALISYS.LBL. I have attached another example. If anyone knows how to do this or another way that is better or easier please help.
Reply
  •  So the =Ref_ID:N worked! Thanks for your help.
    Now My Customer wants to add an OUTTOL Column to the TEXTUALANALISYS.LBL. I have been playing with the label and copied the =LOADSTR() From LINE2.LBL and it populated the Title "OUTTOL" correctly but I am not having any luck with the Cell Expression. All of the examples I see have the +TOL_ and -TOL and are using them along with the DEV in order to get the OUTTOL to populate correctly. I have tried to ad them to the TEXTUALANALISYS.LBL that I have modified but am not having any luck because they dont have a tolerance defined as they are just vector points. I think there has to be a way to calculate the OUTTOL using the LINE2.LBL (contains the Geometric measurements defigned by the FCF) used in conjunction with the TEXTUALANALISYS.LBL. I have attached another example. If anyone knows how to do this or another way that is better or easier please help.
Children
No Data