Another instance of my programmer and I butting heads. First off, I want to ask... Is an alignment needed to measure the concentricity of 2 circles? If so, can a proper alignment be made with paint on the plane that we are leveling the part to? He says that even with paint (very uneven paint) on the part, the concentricity will be accurate. Again, be gentle.
ISO use to differ concentricity (2D) and "Coaxiality" (3D).
If you look at ISO1101, you can see that concentricity is defined only for 2 coplanar circles, so in the same cut plane.
An easy way to check value is to create a local alignment on the datum, and dimension the polar radius of the feature : no hidden method calculating !
ISO use to differ concentricity (2D) and "Coaxiality" (3D).
If you look at ISO1101, you can see that concentricity is defined only for 2 coplanar circles, so in the same cut plane.
An easy way to check value is to create a local alignment on the datum, and dimension the polar radius of the feature : no hidden method calculating !
