hexagon logo
Register Sign in
  • Replies 6 replies
  • Subscribers 223 subscribers
  • Views 101 views
  • Users 0 members are here
Options
Related

true position problems!!

ilomeli90
hello there! so i've been having problems fixing this true position dimension. say the part location, on x and y are 1.0 x 1.0 true position of .005. but if my nominal says its 1.005 x 1.007 and i can't change that! because my actual readings are of 1.001 x 1.003. so because i cannot change my nominals, the report states its out of print. I already went and changed the nominals manually on the program. also on the advanced tap on true position, checked and unchecked "update feature nominal" but nothing seems to change those numbers. Any help will be appreciated. Thank you.
Parents
  • Are you using CAD? CAD might be bad. It's not likely but it could happen. Are the nominals in the feature or in the dimension?
    Can you post some code?

    thanks for replyingSlight smile well it does seem that the cad is incorrect. but i started from scratch, not using the cad and it still does the same. and yes the code does go through.
Reply
  • Are you using CAD? CAD might be bad. It's not likely but it could happen. Are the nominals in the feature or in the dimension?
    Can you post some code?

    thanks for replyingSlight smile well it does seem that the cad is incorrect. but i started from scratch, not using the cad and it still does the same. and yes the code does go through.
Children
No Data
© 2025 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement