Once in awhile, pc-dmis will not print out one of the axis results when using Xact measure. For example, reporting out a true position of a feature that measures in the X and Z axis. After running program, only the Z axis results show up. If I hit F9 and then OK, the X axis results will appear but next time I run the program, same thing. Only the Z axis results appear. I have maybe 5 or 6 programs where this seems to happen a lot. I have tried everything I can think of to fix this but it just doesn't work. Has anyone else run into this problem or have any suggestions?
Restarting PC-DMIS and also restarting the PC does not help. Both the printout and PDF is doing the same. The only way to keep this from happening is after each run is to close out the program and reload it otherwise the first run will be ok and the 2nd run it will not printout one of the axis just as described above.
Restarting PC-DMIS and also restarting the PC does not help. Both the printout and PDF is doing the same. The only way to keep this from happening is after each run is to close out the program and reload it otherwise the first run will be ok and the 2nd run it will not printout one of the axis just as described above.
