Read point alignment.

Thank all for the help but still no luck, I must be missing something super simple. Machine OUTTOL once again
You guys see anything wrong here?

When trying to go to PLN1. It tries to go to X7.7 Y10.8 Z-17.
And when I create my readpoint, it is roughly X7.7 Y10.8 Z-17 away from the model.


LOADPROBE/PROBE 1
TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0
COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,

Insert Probe at start point.

Machine will now go into DCC Mode.
MODE/DCC
PNT1 =FEAT/POINT,CARTESIAN
THEO/<0,0,0>,<0,0,1>
ACTL/<1.5426,2.7383,-1.9139>,<0,0,1>
READPOINT/
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/TRANS,XAXIS,PNT1
ALIGNMENT/TRANS,YAXIS,PNT1
ALIGNMENT/TRANS,ZAXIS,PNT1
ALIGNMENT/END
MOVE/POINT,NORMAL,<5.7881,9.5447,-17.2639>
PLN1 =FEAT/PLANE,CARTESIAN,TRIANGLE
THEO/<1.0516,1.1218,1.2>,<0,0,1>
ACTL/<0.0669,-0.6742,4.5532>,<0,0,1>
MEAS/PLANE,4
HIT/BASIC,NORMAL,<0.6151,1.2515,1.2>,<0,0,1>,<-0.3696,-0.5446,4.5532>,USE THEO=YES
HIT/BASIC,NORMAL,<1.4986,1.3791,1.2>,<0,0,1>,<0.5139,-0.417,4.5532>,USE THEO=YES
HIT/BASIC,NORMAL,<1.535,0.9145,1.2>,<0,0,1>,<0.5503,-0.8816,4.5532>,USE THEO=YES
HIT/BASIC,NORMAL,<0.5578,0.9423,1.2>,<0,0,1>,<-0.4269,-0.8538,4.5532>,USE THEO=YES
ENDMEAS/

It seems like you are doing everything right except for one thing. You move point of <5.7881,9.5447,-17.2639> seems to not be correct. Are you taking your move by hitting the button on the jogbox?

It seems like you are doing everything right except for one thing. You move point of <5.7881,9.5447,-17.2639> seems to not be correct. Are you taking your move by hitting the button on the jogbox?