I ended up putting a read point, origining to the read point, and measuring my diameter that way. See code below. Thanks for all of your help.
MOVE/INCREMENT,<0,0,0.25> MOVE/POINT,NORMAL,<-.11811,1.535434,0.25> MODE/MANUAL COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, Lower probe into marker hole at the nose. Once in position, press okay to engage DCC Mode. READPNTCIR8=FEAT/POINT,CARTESIAN THEO/<-0.11811,1.535434,-0.145004>,<0.0069459,-0.0013335,0.999975> ACTL/<-0.120565,1.539376,-0.258054>,<0.0069459,-0.0013335,0.999975> READPOINT/ MODE/DCC A3 =ALIGNMENT/START,RECALL:A6,LIST=YES ALIGNMENT/TRANS,ZAXIS,READPNTCIR8 ALIGNMENT/END CIR8 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<-0.11811,1.535434,0>,<0,0,1>,0.0305 ACTL/<-0.116791,1.5367,0>,<0,0,1>,0.030769 TARG/<-0.11811,1.535434,0>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=7,DEPTH=0,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=NO,DISTANCE=0.393701 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO RECALL/ALIGNMENT,INTERNAL,A6
PC DMIS 2017 CAD++ 2017R2 Build 1153 SP3.
Measuring a part with holes that have a Z+ surface vector. The height of the holes fluctuate plus/minus 0.050" in the Z axis (crappy roughed out 3-D printed parts supplied from an overseas customer).
How do i set up my program todo the following: Go to nominal Z height and try to measure... if it doesn't find the hole, ask me to lower or raise the probe to the center of the hole, and press go to take its measurement?
I am working offline & playing with settings but since I don't have a physical part, I am having a hard time visualizing what is actually going to happen so i decided tor reach out for help.
Thanks in advance,
-Dan