Hello, I have a very big print with at least 100 dimensions being called out on it, now the problem i'm having is that after i imported the cad in and match my part set up to the cad, the xy are switched on the print on pcdmis y forward and back and x is side to side, and on the print its y side to side and x forward and back. How do i get pcdmis to match the print and the cad stay the same. I would really hate to go through every dimension and switch xy on the print. I hope i explain this well enough. Any help would be great
Just some extra information: It is impossible to just 'flip' X and Y, as that would produce a left-handed coordinate system and PC-DMIS only does right-handed. This means that when you rotate XPLUS to become YPLUS, the rotated old YPLUS will point in the old XMINUS direction.
Just some extra information: It is impossible to just 'flip' X and Y, as that would produce a left-handed coordinate system and PC-DMIS only does right-handed. This means that when you rotate XPLUS to become YPLUS, the rotated old YPLUS will point in the old XMINUS direction.
