All of my FAIRs and FIRs are bubbled such that the True Position and Size are two different bubbles and require two different
labeled dimensional readouts on my reports; thus, I make separate dimensions for size (diameter in this case) and true position. The problem i'm running into is my reports have information that shows up twice since the true position dimensions by default output x,y,z, Datum Size(probably only with a MMC call out, which is the case here), and Feature Size when the only output I want is the position: I've unchecked the boxes shown in the attached picture, but when I execute my program it re-checks them for me.
Am I doing something wrong or is this another 'enhancement'?
A note though, LOCation dimensions might not state the same as the dimensions used in the TP. I would very much want the coordinates from the TP to display together with the TP just for that reason alone when looking at "other peoples" reports. LOC != TP.
A note though, LOCation dimensions might not state the same as the dimensions used in the TP. I would very much want the coordinates from the TP to display together with the TP just for that reason alone when looking at "other peoples" reports. LOC != TP.
