Hello,
What are some ways to check true position of threads. (5/8-11 UNC-2B TAP THRU)
Also, having trouble applying this to the Feature Control Frame Editor. (threads specifically)
Hopefully someone else knows how to execute this task.
When checking threads, use the pitch setting in the auto circle feature. That’s the best way to do it if you don’t have locators. Another way is to use a shank probe but when you use a shank probe, make very certain you touch the sphere at A0BO and it’s perfect. If not, you will have a hard time qualifying or may have bad parts.
When checking threads, use the pitch setting in the auto circle feature. That’s the best way to do it if you don’t have locators. Another way is to use a shank probe but when you use a shank probe, make very certain you touch the sphere at A0BO and it’s perfect. If not, you will have a hard time qualifying or may have bad parts.