hexagon logo
Register Sign in
  • Replies 10 replies
  • Subscribers 223 subscribers
  • Views 122 views
  • Users 0 members are here
Options
Related

True Position of threads

OUHDEN
Hello,
What are some ways to check true position of threads. (5/8-11 UNC-2B TAP THRU)
Also, having trouble applying this to the Feature Control Frame Editor. (threads specifically)
Hopefully someone else knows how to execute this task.
Parents
  • I've gotten this answer from a member here forgot what his name was or i would give credit.

    Create a linear open scan along the bottom of the thread. It doesn't need to be long, just long enough to find the Minor diameter. Create a generic point to the highest point on that scan using "max index". Create an auto cylinder change the pitch to the correct pitch for the thread. Now edit the starting point of the cylinder and use the generic point. This will ensure your probe will always start on the Minor diameter giving you better results. 

    SCN7       =FEAT/SCAN,LINEAROPEN,NUMBER OF HITS=17,SHOW HITS=NO,SHOWALLPARAMS=YES
            EXEC MODE=DEFINED, NOMS MODE=NOMINALS,CLEARPLANE=NO,SINGLE POINT=NO,THICKNESS=0
            FINDNOMS=0.15,SELECTEDONLY=YES,USEBESTFIT=NO,PROBECOMP=YES,AVOIDANCE MOVE=NO,DISTANCE=0,CAD Compensation=NO,4-axis scan=NO
            DIR1=NULLFILTER,
            HITTYPE=VECTOR
            INITVEC=0.0019256,0,0.9999982
            DIRVEC=0,1,0
            CUTVEC=-0.9999982,0,0.0019256
            ENDVEC=0.0019256,0,0.9999982
            PLANEVEC=0,-1,0
            POINT1=0,-0.477,-2.698
            POINT2=0,-0.4228,-2.698
            MEAS/SCAN
              BASICSCAN/LINE,NUMBER OF HITS=17,SHOW HITS=NO,SHOWALLPARAMS=YES
              <0,-0.477,-2.698>,<0,-0.4228,-2.698>,CutVec=-0.9999982,0,0.0019256,DirVec=0,1,0
              InitVec=0,0,1,EndVec=0,0,1,THICKNESS=0
              FILTER/NULLFILTER,
              EXEC MODE=DEFINED
              BOUNDARY/PLANE,<0,-0.4228,-2.698>,PlaneVec=0,-1,0,Crossings=1
              HITTYPE/VECTOR
              NOMS MODE=NOM,0.15
              ENDSCAN
            ENDMEAS/
            ASSIGN/V101=MAXINDEX(SCN7.HIT[1..SCN7.NUMHITS].Z)
F3         =GENERIC/POINT,DEPENDENT,CARTESIAN,$
            NOM/XYZ,<SCN7.HIT[V101].X,SCN7.HIT[V101].Y,SCN7.HIT[V101].Z>,$
            MEAS/XYZ,<SCN7.HIT[V101].X,SCN7.HIT[V101].Y,SCN7.HIT[V101].Z>,$
            NOM/IJK,<0,0,1>,$
            MEAS/IJK,<0,0,1>
CYL10      =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_SPIRAL_SCAN,CARTESIAN,IN,LEAST_SQR
            THEO/<0,F3.Y,-2.63>,<0,-1,0>,0.136,0.1
            ACTL/<-0.0002,-0.4479,-2.6298>,<0.0011409,-0.9999948,0.0030175>,0.1403,0.1
            TARG/<0,-0.477,-2.63>,<0,-1,0>
            START ANG=-90,END ANG=360
            ANGLE VEC=<1,0,0>
            DIRECTION=CW
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO,USE THEO=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              AUTO WRIST=NO
              CIRCULAR MOVES=STRAIGHT
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=5,NUMLEVELS=4,DEPTH=0,END OFFSET=0,PITCH=0.0321
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=0,SPACER=0
              AVOIDANCE MOVE=NO,DISTANCE=0.3937
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=NO
  • in reply to Froush
    Your goal is to take an array of hits (or a scan) along a radial cross-section of the threads.
    -I generally take a scan of hits that's 0.005" increments along a length of three pitches worth, just to be certain i get the actual point i need.
    --You would then extract the hit you feel you need to take. You can use that MAXINDEX or MININDEX to judge the pitch diameter (between minors), or the minor thread pitch. of course you will never get an accurate diameter for the PD, but if your minor thread is burred up or choppy, you can invert this assign max/min index function to zero your start point to probe directly in the middle of the minor's as applies.
Reply
  • in reply to Froush
    Your goal is to take an array of hits (or a scan) along a radial cross-section of the threads.
    -I generally take a scan of hits that's 0.005" increments along a length of three pitches worth, just to be certain i get the actual point i need.
    --You would then extract the hit you feel you need to take. You can use that MAXINDEX or MININDEX to judge the pitch diameter (between minors), or the minor thread pitch. of course you will never get an accurate diameter for the PD, but if your minor thread is burred up or choppy, you can invert this assign max/min index function to zero your start point to probe directly in the middle of the minor's as applies.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement