I'm fairly new to PC Dmis and I'm attempting to report true position for a large number of threaded holes. I can't figure out how to turn off reporting the size of the holes which is irrelevant for threaded holes as they will be checked with a thread gage. Any help would be appreciated.
Could someone please help me with the following. Attached is a Xact output with datum modifiers as per print. The position of the feature is fine but the datum features are showing red. i know that it has to do with the datum shift, but is there any way we can deselect them or at least have them green. People don't understand that this is not a a reflection of the position of the feature but added information on the datum modifier.
Please start a new thread with this issue, giving us an example of your print/geometry and your alignment structure.
You can remove the sections from the report, but you may be letting a nonconforming part go. Let's look into your issue further before masking the report.
RAPORTUJ ROZMIAR LOKALNY is "report local size
how they did this in 2023 R1
Turning it off just make one line less i do not know is it flustrating or funny .....
I need to have my local size but meybe with another Raport name and meybe in some another place in raport.
Need to turn of every characteristic manually or there is some another way for this bug ?
Deleting lines with my feature in report part - i could able to do it only once.
Now deleting one line is deleting whole Characteristic lol
If you have MMC on, I believe it will always fight you and add size. Try this: construct point, cast, off each circle. True position that point. That way, there's no diameter to report and you avoided the whole issue.
There's a similar bug with PC-DMIS failing to report sizes on FCF perpendicularity, even if you ask for diameter of feature (it will if MMC is used).