DIM ANGL1= 3D ANGLE FROM LINE LIN1 TO LINE LIN2 ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX MEAS
A 15.0135 ----#----
ASSIGN/V1=ANGL1.A.MEAS
IF/V1<15.01350
ASSIGN/ALIGN_MATH=COS(V1)
END_IF/
IF/V1>15.01350
ASSIGN/ALIGN_MATH=SIN(V1)
END_IF/
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/ROTATE_OFFSET,ALIGN_MATH,ABOUT,ZPLUS
ALIGNMENT/END
Just fix the math syntax (SIN, COS, TAN, ASIN,ACOS,ATAN).
Then do your distance dimension while recalling alignment A1.
