Looping a program for a capability study, reporting out with Excel Form Report. I have it set up for 30 parts.
2020R2.
It keeps reporting the first part rather than each new part. This used to work. What may have changed?
The excel form report requires you to use the PCD ID and if you're needing to measure 30 parts make sure you have at least 30 columns with {Measured Value} in the data field. When using the excel form report with a loop, you need to turn the loop ID to NO. And I put a print command inside the start of the loop to delete previous instances or you could put it before the loop end but after the excel form report command.
The excel form report requires you to use the PCD ID and if you're needing to measure 30 parts make sure you have at least 30 columns with {Measured Value} in the data field. When using the excel form report with a loop, you need to turn the loop ID to NO. And I put a print command inside the start of the loop to delete previous instances or you could put it before the loop end but after the excel form report command.
