Need to calculate these from a set of 8 results
[Spacing error not to exceed 0.005,
spacing between adjacent slot 0.003, 1 place may be 0.005 max]
I am using following code to calculate spacing error within 0.005, but I'm not sure how to find "
1 place may be 0.005 max"
I would highly appreciate any guidance as I need to create similar program for 60 set of slots as well.
LOC_ADJ1, 2, 3... is the spacing between adjacent slots
ASSIGN/ZERO=0
ASSIGN/V1=LOC_ADJ1.X.MEAS
ASSIGN/V2=LOC_ADJ2.X.MEAS
ASSIGN/V3=LOC_ADJ3.X.MEAS
ASSIGN/V4=LOC_ADJ4.X.MEAS
ASSIGN/V5=LOC_ADJ5.X.MEAS
ASSIGN/V6=LOC_ADJ6.X.MEAS
ASSIGN/V7=LOC_ADJ7.X.MEAS
ASSIGN/V8=LOC_ADJ8.X.MEAS
ASSIGN/VR=ARRAY(V1,V2,V3,V4,V5,V6,V7,V8)
ASSIGN/VMAX=MAX(VR)
ASSIGN/VMIN=MIN(VR)
ASSIGN/AVG=VMAX-VMIN
F1 =GENERIC/POINT,DEPENDENT,CARTESIAN,$
NOM/XYZ,<ZERO,ZERO,ZERO>,$
MEAS/XYZ,<AVG,AVG,AVG>,$
NOM/IJK,<0,0,1>,$
MEAS/IJK,<0,0,1>
DIM LOC_ADJ9= LOCATION OF POINT F1 UNITS=IN ,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH HALF ANGLE=NO
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
X 0.00000 0.00500 0.00500 0.00001 0.00001 0.00000 --#--
END OF DIMENSION LOC_ADJ9
