Hello,
I have a problem, we measure the position of the pin and more precisely the position of the pin width.
3-3.2mm pos. 1 (M) DEF.
In order to measure the pin, we have to base it on another element and turn the alignment by a certain degree. Then the center of the pin is X = 0, Z = 0
In the program, and placement on the machine the width is in the Z axis.
The question is whether we can report the position in the current alignment when we care about the left/right movement of the pin, where Z nominal is 0 and shows us our deviation (left/right)
So position, current alignemt, only axis Z.
Or do I have to choose datum reference, and XYZ.
I will add that the results differ by 0.4mm
Cheers !
