i Was wondering if anyone could help me out with a translation
I wrote an auto calibration program which recognizes the probes in the part program and calibrates them.
My only problem is that out company is Hungarian. i use pc-dmis mostly english but my team mates are not.
i want this program to run even on hungarian language settings but i just can't figure out what could be the right string command.
Does anybody has a translation file for these kind of commands ?
with hungarian PC-DMIS software wont recognize these. i think mainly because of the String commands
ASSIGN/TAPINTOKERES1=GETCOMMAND("Load Probe", "DOWN", 4)
ASSIGN/TAPINTO1=GETTEXT("Filename", 0, TAPINTOKERES1)
my code looks like this
KERDES =COMMENT/YESNO,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,OVC=NO,
Szeretné futtatni a kalibráló programot?
IF/KERDES.INPUT=="YES"
LOADPROBE/BOSCH-REF
TIP/TIP1, SHANKIJK=0, 0, 1, ANGLE=0
AUTOCALIBRATE/PROBE, PARAMETER_SET=ALL-TIPS-WITH-DEFAULTS, QUALTOOL_MOVED=YES_DCC,
CHECK COLLISION=YES, SHOW_SUMMARY=YES, OVERWRITE_RESULTSFILE=NO
BEGIN AUTOCALIBRATE RESULTS FOR PROBE BOSCH-REF USING SET ALL-TIPS-WITH-DEFAULTS
END AUTOCALIBRATE RESULTS FOR PROBE BOSCH-REF USING SET ALL-TIPS-WITH-DEFAULTS
END_IF/
ELSE_IF/KERDES.INPUT<>"YES"
GOTO/PROGRAMFUTAS
END_ELSEIF/
ASSIGN/TAPINTOKERES1=GETCOMMAND("Load Probe", "DOWN", 4)
ASSIGN/TAPINTO1=GETTEXT("Filename", 0, TAPINTOKERES1)
LOADPROBE/TAPINTO1
AUTOCALIBRATE/PROBE, PARAMETER_SET=ALL-TIPS-WITH-DEFAULTS, QUALTOOL_MOVED=NO,
CHECK COLLISION=NO, SHOW_SUMMARY=YES, OVERWRITE_RESULTSFILE=NO
BEGIN AUTOCALIBRATE RESULTS FOR PROBE USING SET ALL-TIPS-WITH-DEFAULTS
END AUTOCALIBRATE RESULTS FOR PROBE USING SET ALL-TIPS-WITH-DEFAULTS
ASSIGN/TAPINTOKERES2=GETCOMMAND("Load Probe", "DOWN", 4)
ASSIGN/TAPINTO2=GETTEXT("Filename", 0, TAPINTOKERES2)
IF/TAPINTO2==""
GOTO/PROGRAMFUTAS
END_IF/
IF/TAPINTO2==TAPINTO1
GOTO/KOVETKEZO
END_IF/
ELSE_IF/TAPINTO2<>TAPINTO1
LOADPROBE/TAPINTO2
TIP/, SHANKIJK=0, 0, 1, ANGLE=0
AUTOCALIBRATE/PROBE, PARAMETER_SET=ALL-TIPS-WITH-DEFAULTS, QUALTOOL_MOVED=NO,
CHECK COLLISION=NO, SHOW_SUMMARY=YES, OVERWRITE_RESULTSFILE=NO
BEGIN AUTOCALIBRATE RESULTS FOR PROBE USING SET ALL-TIPS-WITH-DEFAULTS
END AUTOCALIBRATE RESULTS FOR PROBE USING SET ALL-TIPS-WITH-DEFAULTS
END_ELSEIF/
ASSIGN/TAPINTOKERES3=GETCOMMAND("Load Probe", "DOWN", 4)
ASSIGN/TAPINTO3=GETTEXT("Filename", 0, TAPINTOKERES3)
KOVETKEZO =LABEL/
IF/TAPINTO3==TAPINTO2 OR TAPINTO3==TAPINTO1
GOTO/PROGRAMFUTAS
END_IF/
ELSE_IF/TAPINTO3<>TAPINTO2 OR TAPINTO3<>TAPINTO1
LOADPROBE/TAPINTO3
AUTOCALIBRATE/PROBE, PARAMETER_SET=ALL-TIPS-WITH-DEFAULTS, QUALTOOL_MOVED=NO,
CHECK COLLISION=NO, SHOW_SUMMARY=YES, OVERWRITE_RESULTSFILE=NO
BEGIN AUTOCALIBRATE RESULTS FOR PROBE USING SET ALL-TIPS-WITH-DEFAULTS
END AUTOCALIBRATE RESULTS FOR PROBE USING SET ALL-TIPS-WITH-DEFAULTS
END_ELSEIF/
