Extract theos from an auto sphere and convert them into individual vector points

I created an auto sphere with 25 hits, and I want to make 25 individual vector points out of them. Is there an easy way to do it?

Parents

JEFMAN over 2 years ago

Something like this :

V1 =LOOP/START,ID=YES,NUMBER=SPH1.NUMHITS,START=1,SKIP=,
OFFSET:XAXIS=0,YAXIS=0,ZAXIS=0,ANGLE=0
ASSIGN/V2="SPH1.HIT["+V1+"]"
MOVE/CLEARPLANE
PT1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<V2.X,V2.Y,V2.Z>,<V2.I,V2.J,V2.K>
ACTL/<0,0,12.5>,<0,0,1>
TARG/<V2.X,V2.Y,V2.Z>,<V2.I,V2.J,V2.K>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
SHOW HITS=NO
ENDMEAS/
MOVE/CLEARPLANE
LOOP/END

Reply

JEFMAN over 2 years ago

Something like this :

V1 =LOOP/START,ID=YES,NUMBER=SPH1.NUMHITS,START=1,SKIP=,
OFFSET:XAXIS=0,YAXIS=0,ZAXIS=0,ANGLE=0
ASSIGN/V2="SPH1.HIT["+V1+"]"
MOVE/CLEARPLANE
PT1 =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
THEO/<V2.X,V2.Y,V2.Z>,<V2.I,V2.J,V2.K>
ACTL/<0,0,12.5>,<0,0,1>
TARG/<V2.X,V2.Y,V2.Z>,<V2.I,V2.J,V2.K>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
SHOW HITS=NO
ENDMEAS/
MOVE/CLEARPLANE
LOOP/END

Children

No Data