hexagon logo
Register Sign in
  • Replies 24 replies
  • Subscribers 221 subscribers
  • Views 260 views
  • Users 0 members are here
Options
Related

Auto Features not moving...

pgvsmit
I'm trying to move the circle path of an auto plane on the Y axis and it will not move. So far I've tried:
changing the Y coordinate in the feature in summary mode (by .010", .050", and 2")
changing he Y coordinate in the feature in command mode (by .010", .050", and 2")
changing the Y coordinate to an adjacent plane with a +.512 displacement

Nothing works. Nothing changes where the probe approaches the part. the probe still looks for the plane in the same location as the default setting (Y 14.571 in this instance).

any ideas?
Parents



  • I've also just tried putting actual values in place of the features and nothing changes. the probe still looks for the plane circle at the same Y location
  • in reply to pgvsmit
    As Jefman stated Spacer should not be set to 0 this should be set to the Radial value of were you want to contact the plane face.

    Also if the planes are for measuring the groove faces you need to change the pattern from square to radial. This will allow you to change rows to rings and should only be set at 1.

    You will also need to turn on Circular Moves.

    At present your setup is trying to measure a square plane of 3 hits in 3 rows with a spacing of zero
Reply
  • in reply to pgvsmit
    As Jefman stated Spacer should not be set to 0 this should be set to the Radial value of were you want to contact the plane face.

    Also if the planes are for measuring the groove faces you need to change the pattern from square to radial. This will allow you to change rows to rings and should only be set at 1.

    You will also need to turn on Circular Moves.

    At present your setup is trying to measure a square plane of 3 hits in 3 rows with a spacing of zero
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement