I'm trying to run a program, but I am having trouble with the manual alignment. After I do the manual alignment, the X and Z planes seem to align fine, but I'm having an issue with the Y plane. The triangles for the features line up fine on the X and Z planes on my model, but not the Y plane. That triangle is lined up at an angle, almost perpendicular to the plane. The part is set up with the A datum facing up, the B datum facing the front, and the C datum facing the left. I'm not sure what I'm doing wrong. I did not make this program, I'm only running it. Any help would be appreciated as I'm fairly new to this.
your vectors aren't mimicking how you are saying the part is set up. For instance the first plane (43) has an IJK of 1,0,0. If your A datum is facing up and down, then it should be 0,0,1. If you're in MCS. Same with your other planes. Are you on a horizontal machine by chance?
your vectors aren't mimicking how you are saying the part is set up. For instance the first plane (43) has an IJK of 1,0,0. If your A datum is facing up and down, then it should be 0,0,1. If you're in MCS. Same with your other planes. Are you on a horizontal machine by chance?