Your Products have been synced, click here to refresh
hi,
you can try it out and see if it works.
Unfortunately, I didn't have any measurement data to hand,
so I don't know exactly if this works, but looks good so far.
basically it's like @ R2ah1ze1l said
Note that with this variant, the names of the circles should be countable like this: NAME_1 NAME_2 NAME_n
however the "name"-part can be changed, (only make sure you can count it up)
ASSIGN/VCOUNT_MAX=4 ASSIGN/VCOUNT_ACTUAL=0 ASSIGN/VROUNDNESS=0 WHILE/VCOUNT_ACTUAL < VCOUNT_MAX ASSIGN/VCOUNT_ACTUAL=VCOUNT_ACTUAL+1 ASSIGN/VNAME="NAME_"+STR(VCOUNT_ACTUAL) RND =GEOMETRIC_TOLERANCE/STANDARD=ISO 1101,SHOWEXPANDED=YES, FEATURE_MATH=DEFAULT, UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100, SEGMENT_1,CIRCULARITY,0.01,TOL_ZONE_MATH=DEFAULT, TEXT=OFF,CADGRAPH=OFF,REPORTGRAPH=OFF,MULT=10, MEASURED: NAME_4:0.000, FEATURES/VNAME,, $$ YES, VNAME $$ YES, RND.SEGMENT[1].FEATURE[1].MEAS ASSIGN/VROUNDNESS[VCOUNT_ACTUAL]=RND.SEGMENT[1].FEATURE[1].MEAS END_WHILE/
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |