hexagon logo
Register Sign in
  • Replies 12 replies
  • Subscribers 221 subscribers
  • Views 137 views
  • Users 0 members are here
Options
Related

tip approach vector

pgvsmit
got this part running

clearance cube set to -X approach and retract for the probe tip

the middle rows of holes work out just fine

but im trying to probe the upper rows of holes and the tip is trying to approach from the +X direction

thoughts??

and please dont say "just give up on the clearance cube"!! ive found it very useful :-)

Parents
  • On the other hand I haven't used clearance cube since finishing level 2 training class years ago. Found move/point normal, increment & clearplane options to be way better. Try those. I found CC to be cumbersome & prone to smashing up probes if you're not too careful. And the latest pc dmis versions (2020-2022) don't help much either. Very buggy & prone to mess up CC big time. I would recommend too switching from summary mode to command mode. Better program control, better understanding of what's going on & easier time to fix things when you see more on the edit window screen.
Reply
  • On the other hand I haven't used clearance cube since finishing level 2 training class years ago. Found move/point normal, increment & clearplane options to be way better. Try those. I found CC to be cumbersome & prone to smashing up probes if you're not too careful. And the latest pc dmis versions (2020-2022) don't help much either. Very buggy & prone to mess up CC big time. I would recommend too switching from summary mode to command mode. Better program control, better understanding of what's going on & easier time to fix things when you see more on the edit window screen.
Children
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement