hexagon logo
Register Sign in
  • Replies 12 replies
  • Subscribers 221 subscribers
  • Views 136 views
  • Users 0 members are here
Options
Related

tip approach vector

pgvsmit
got this part running

clearance cube set to -X approach and retract for the probe tip

the middle rows of holes work out just fine

but im trying to probe the upper rows of holes and the tip is trying to approach from the +X direction

thoughts??

and please dont say "just give up on the clearance cube"!! ive found it very useful :-)

Parents
  • Instead of independently opening each feature, it may be helpful to review your similar features in the edit window using command mode.
    By all means switch back to summary after your review for normal running, but you can see more information in a glance using command mode which could help yield your solution faster.

    I haven't worked with CC and have no desire to. Hope you find what settings are causing your issue.
  • in reply to R2ah1ze1l
    And this may be the case for utilizing command mode to review your issue, IMO. This was not any sort of 'my way vs your way', merely that you explained you have already made attempts and those attempts were not getting you the success you were looking for. Typically, that would mean you NEED to do something else. Good luck with your issue.
Reply
  • in reply to R2ah1ze1l
    And this may be the case for utilizing command mode to review your issue, IMO. This was not any sort of 'my way vs your way', merely that you explained you have already made attempts and those attempts were not getting you the success you were looking for. Typically, that would mean you NEED to do something else. Good luck with your issue.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement