Can someone explain what is the difference between this and the other standard stylus module (puck)? I’ve attached a picture. I was told this one can hold longer probes?
So I used a 150mm extension with a 5X50 and for some reason when I measure a circle, it’s way off from where it should be. It’s only happening with that probe. Does this need to be calibrated with certain settings? It also doesn’t actually scan the entire circle.
So I used a 150mm extension with a 5X50 and for some reason when I measure a circle, it’s way off from where it should be. It’s only happening with that probe. Does this need to be calibrated with certain settings? It also doesn’t actually scan the entire circle.
