https://downloads.ms.hexagonmi.com/PC-DMIS-Versions/Release/2022.2/SP4/x64
Release Notes - 2022.2 SP4
************************
Application Errors
************************
You no longer get application errors:
• When you try to open the Construct Feature dialog box with the Preview Window
dialog box already opened. See PCD-241108.
• When you click Cancel in the Probe Utilities dialog box. See PCD-241798.
************************
Calibration
************************
• PC-DMIS no longer displays errors when you use collision check on a probe
calibration ScanRDV for multiple tips. See PCD-237399.
************************
DMIS
************************
• You can now export DMO files for ISO tolerance commands. See PCD-241276.
ESF (VWMP)
• You can now edit dimension tolerances in the Edit window for ESF (VWMP)
features. See PCD-205720.
************************
GD&T Dimensions
************************
• PC-DMIS now correctly draws the tolerance zone when you report the legacy
Angularity and Perpendicularity of a 3D line. See PCD-238331.
• PC-DMIS now retains the Workplane setting in the Geometric Tolerance dialog box
when you switch between ASME and ISO standards. See PCD-241818.
************************
Laser
************************
• PC-DMIS now correctly extracts all the features when you import a new Mesh or
COP into a measurement routine and then execute the measurement routine offline.
See PCD-234088.
• You can now run laser offline simulations with HP-L-10.10 in inch units. See
PCD-240460.
• PC-DMIS no longer fails scans when HP-L and HP-OW sensors are on the same
computer. See PCD-240484.
• PC-DMIS now correctly recognizes spot lasers defined in USRPROBE.DAT files.
See PCD-241618.
************************
Legacy Dimensions
************************
• PC-DMIS now applies thickness correctly in dimension commands when you apply
actual thickness to auto plane features. See PCD-167531.
************************
Measurement Strategy Editor
************************
• PC-DMIS now correctly converts the Scan Speed and Acceleration values in the
Measurement Strategy Editor dialog box when a measurement routine is in inch
units. See PCD-235998.
• PC-DMIS now updates feature values after you apply smart parameters in the
Measurement Strategy Editor dialog box. See PCD-238583.
************************
Pointcloud
************************
• PC-DMIS no longer loses the COP color that you set when you change the
Operator type in the Pointcloud Operator dialog box. See PCD-239202.
• You can now clear the COP surface colormaps created on an STL CAD model when
you select None from the Colormaps list. See PCD-239954.
• PC-DMIS now shows the Portable Scanning Widget toolbar when the current
probe is a laser probe. See PCD-241723.
************************
Portable
************************
• PC-DMIS now works correctly for the Auto Trigger plane with an auto line feature.
See PCD-228148.
************************
Reporting
************************
• PC-DMIS now updates the PDF report correctly when your measurement routine
contains the Simultaneous Evaluation command for the Geometric Tolerance label.
See PCD-240428.
• PC-DMIS now correctly exports multiple measurements in the Excel Form report
when a measurement routine contains a Max value. See PCD-240969.
************************
Temperature Compensation
************************
• You can now use Legacy Temperature Compensation (V1) on dual arm machines.
See PCD-239992.
• You can now see the correct part temperature when you use manual temperature
compensation V1. See PCD-241294.