hexagon logo
Register Sign in
  • Replies 4 replies
  • Subscribers 222 subscribers
  • Views 76 views
  • Users 0 members are here
Options
Related

Curved Arc Radius...

FMC.QC
Hello,

I've been racking my brain trying to figure out how to check this feature and dimension.... In the CAD software, I draw the arc then wrap cut it around the diameter. PCDmis can't seem to give me a feature for it. Whether I use points, constructed curve, cone, or constructed feature set, I can't seem to make it work. Using 2021.2 SP3. Thanks in advance for any help.

​


​​​
Parents
  • Measure the outer surface as a cylinder, take 2 points on the R18 surface one near the inner surface one near the outer surface construct a line with the 2 points. Construct a pierce point between the
    line and cylinder, you may have to reverse the line to get correct point.
    Repeat this as many time as you deem necessary for creating the radius.
    Ensure you are in the correct workplane and construct a circle from the constructed points.
Reply
  • Measure the outer surface as a cylinder, take 2 points on the R18 surface one near the inner surface one near the outer surface construct a line with the 2 points. Construct a pierce point between the
    line and cylinder, you may have to reverse the line to get correct point.
    Repeat this as many time as you deem necessary for creating the radius.
    Ensure you are in the correct workplane and construct a circle from the constructed points.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement