Has anyone had an issue with PC-DMIS crashing while the CMM is executing an UNLOAD tip command? It has been happening in DCC mode and also using Control E. Does anyone have an idea to what is going on or why? Thank you!
i did try using a tip that wasnt in the rack and it works just fine and im able to load and unload the tips manually. Machine will unload tips just fine into the rack and tell me to load the tip that is not in the rack. After i would do that, i would change back to a tip in the rack and it tells me to remove the tip, which i do, then it picks up the tip in the rack. So, no matter what i do, everything is working great, BUT when i give it an unload command to unload into the rack. So there is definitely something wrong with just the unload command into the rack i just am not sure what. What you suggested works too, just to bypass PC-DMIS from crashing, so for the time being i can do that, just frustrating when that shouldnt be the solution LOL
i did try using a tip that wasnt in the rack and it works just fine and im able to load and unload the tips manually. Machine will unload tips just fine into the rack and tell me to load the tip that is not in the rack. After i would do that, i would change back to a tip in the rack and it tells me to remove the tip, which i do, then it picks up the tip in the rack. So, no matter what i do, everything is working great, BUT when i give it an unload command to unload into the rack. So there is definitely something wrong with just the unload command into the rack i just am not sure what. What you suggested works too, just to bypass PC-DMIS from crashing, so for the time being i can do that, just frustrating when that shouldnt be the solution LOL
