STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES ALIGNMENT/END MODE/MANUAL FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, , LOADPROBE/STAR TIP/T1A0B180, SHANKIJK=1, 0, 0, ANGLE=180 MAN_CYL1 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,OUT,LEAST_SQR THEO/<0,0.7,0>,<0,-1,0>,1.9688,-0.822 ACTL/<0,0.7,0>,<0,-1,0>,1.9688,-0.822 TARG/<0,0.7,0>,<0,-1,0> START ANG=90,END ANG=-90 ANGLE VEC=<1,0,0> DIRECTION=CW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=3,NUMLEVELS=3,DEPTH=0,END OFFSET=0,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=NO FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO MAN_A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES ALIGNMENT/LEVEL,YMINUS,MAN_CYL1 ALIGNMENT/TRANS,XAXIS,MAN_CYL1 ALIGNMENT/TRANS,ZAXIS,MAN_CYL1 ALIGNMENT/END MAN_PLN1 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR THEO/<0,0,0>,<0,-1,0> ACTL/<0,0,0>,<0,-1,0> TARG/<0,0,0>,<0,-1,0> ANGLE VEC=<1,0,0>,RADIAL SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=3,NUMROWS=1 SPACER=0.9 AVOIDANCE MOVE=NO SHOW HITS=NO MAN_PLN2 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR THEO/<0.75,9.0764,0.027>,<1,0,0> ACTL/<0.75,9.0764,0.027>,<1,0,0> TARG/<0.75,9.0764,0.027>,<1,0,0> ANGLE VEC=<0,0,-1>,RADIAL SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=3,NUMRINGS=1 SPACER=0.2 AVOIDANCE MOVE=NO SHOW HITS=NO MAN_A2 =ALIGNMENT/START,RECALL:MAN_A1,LIST=YES ALIGNMENT/TRANS,YAXIS,MAN_PLN1 ALIGNMENT/ROTATE,XPLUS,TO,MAN_PLN2,ABOUT,YPLUS ALIGNMENT/END MODE/DCC