PC DMIS changes their software too much for me to have any desire to use GEOTOL or Xact Measure. I personally don't ever want to get into a situation where I now have to update 3000 programs because they decided to yank part of the software out & call it an "update".
I always create alignments that RECALL/STARTUP that have all six degrees of freedom controlled & my results always correlate with the surface plate measurements which should always be our overall goal. I've never once had someone question me about "whats my datum shift?" nor have I ever worked with anyone that wanted to understand/use the datum shift info unless it was another CMM programmer.
If you don't mind me asking (I'm relatively new), what's the end goal for having your alignments that RECALL/STARTUP? I always have a manual and DCC alignment that constrains all 6 degrees, but they build off of each other, and now I'm wondering if I'm forgetting to do something important.
If you don't mind me asking (I'm relatively new), what's the end goal for having your alignments that RECALL/STARTUP? I always have a manual and DCC alignment that constrains all 6 degrees, but they build off of each other, and now I'm wondering if I'm forgetting to do something important.