hey guys! I'm having trouble validating a measurement method. I am finding different values of concentricity between two diameters. We have already tested leveling in different work planes and positions and the values do not match when compared. in DCC mode I am always creating a plane and a cylinder, where I level and give origin to the cylinder and the plane is my height reference. In this cylinder that I level, I measure three diameters and after measuring them, I measure another larger diameter that is about 20mm away from them and I make the concentricity between them.depending on whether I place the piece lying down or standing up, changing my work plane, my concentricity varies from 0.070mm to 0.200mm. what do you think it could be?
What is the size of the cylinder ? (diameter ; length) How many hits ?
Do you measure the larger diameter as a circle or as a cylinder ? If the datum is the cylinder axis, then you should measure the larger diameter as a cylinder (coaxiality).
You measure 3 diameters in the cylinder : are they concentric to the cylinder axis at the same height ?
As
Henniger123 said, post the code...
What is the size of the cylinder ? (diameter ; length) How many hits ?
Do you measure the larger diameter as a circle or as a cylinder ? If the datum is the cylinder axis, then you should measure the larger diameter as a cylinder (coaxiality).
You measure 3 diameters in the cylinder : are they concentric to the cylinder axis at the same height ?
As
Henniger123 said, post the code...