hexagon logo
Register Sign in
  • Replies 21 replies
  • Subscribers 222 subscribers
  • Views 240 views
  • Users 0 members are here
Options
Related

Not seeing bonus

Michael R
Good Morning All,
I'm stumped on why the bonus from cylinder 3 and cylinder 4 shows up in FCFLOC1 Size but is not applied in FCFLOC Position?
The only bonus I'm getting is from cylinder 5
Cylinders 3 and 4 are on the same axis and cylinder 5 is perpendicular to 3 and 4.
Any help is appreciated, thanks.
Attached Files
Parents
  • You won't see the bonus on datum shifts. PC-DMIS virtually moves the datums, rather than telling the user where the features are actually located. It's a monumentally stupid way to process datum shifts, in my opinion, since you won't be able to provider any data meaningful to manufacturing.

    Sounds like you are the reason they removed datum shifts from Geometric Tolerancing....Rolling eyesSunglasses.

    There is a difference in understanding what & where the raw data is versus just spouting off what the software gives for measurements. One can always turn off MMB if they don't like it, especially in the moment. One can provide manufacturing tighter controls than what is reported to the customer.
Reply
  • You won't see the bonus on datum shifts. PC-DMIS virtually moves the datums, rather than telling the user where the features are actually located. It's a monumentally stupid way to process datum shifts, in my opinion, since you won't be able to provider any data meaningful to manufacturing.

    Sounds like you are the reason they removed datum shifts from Geometric Tolerancing....Rolling eyesSunglasses.

    There is a difference in understanding what & where the raw data is versus just spouting off what the software gives for measurements. One can always turn off MMB if they don't like it, especially in the moment. One can provide manufacturing tighter controls than what is reported to the customer.
Children
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement