Metrology Software Distribution - /PC-DMIS-Versions/Release/2023.2/SP2/x64> (hexagonmi.com)
Release Notes - 2023.2 SP2
*******************************
Alignments
*******************************
• PC-DMIS now displays an error message for a ROTATE_CIRCLE alignment
command that has no associated features assigned to it. See PCD- 249235.
*******************************
Application Errors
*******************************
• PC-DMIS now works correctly with stationary environments when you use an
HP-OW sensor without a vision sensor. This means, you no longer get an error
message that states “Machine type not selected” when you start the PC-DMIS
application. You can now see the Machine Options dialog box when you select the
Edit | Preferences | Machine Interface Setup menu option. See PCD-248663.
• You no longer get an application error when you use child features to create a
Datum Definition command. See PCD-247705.
*******************************
Environment Configurator
*******************************
• PC-DMIS now correctly downgrades to a lower version when you configure an
environment file to a lower version. See PCD-250052.
*******************************
GD&T Dimensions
*******************************
• You can now see that an expression that uses the .meas extension returns the
same value when it references the Geometric Tolerance command as it did when it
referenced the Xact Measure command. See PCD-244140.
• PC-DMIS now correctly creates all the GD&T callouts when you answer “YES” to
the “Do you want to create commands from the CAD GD&T” message after you
import a CAD PMI model. See PCD-244935.
• PC-DMIS no longer displays invalid features in the features list area in the Feature
Control Frame tab of the Geometric Tolerance dialog box when you use the
search box to filter the features. See PCD-245713.
• You can now see the size dimensions in the Report window when you migrate from
XactMeasure to Geometric Tolerance commands. See PCD-249215.
• PC-DMIS now correctly retains the datums when you press Ctrl + U to execute
a measurement routine from the cursor’s current location inside a loop. See
PCD-249256.
• PC-DMIS now correctly handles the common datums when you answer “YES” to
the “Do you want to create commands from the CAD GD&T” message after you
import a CAD PMI model. See PCD-249338.
*******************************
Graphical Analysis Window
*******************************
• PC-DMIS now correctly retains the new value as the default when you
click Default after you modify the Sphere size from the Display Options tab of
the Graphical Analysis dialog box. This means, PC-DMIS now saves the new
value to the UserSettings.json file. See PCD-249759.
*******************************
Laser Feature Extraction
*******************************
• PC-DMIS now compares each scanned point's estimated normal to the pointcloud
point's nominal normal when you use the Max incidence angle filter to create a 3D
Laser feature from the Auto Feature dialog box. See PCD-247677.
*******************************
Legacy Dimensions
*******************************
• PC-DMIS now correctly assigns each feature a number to the right of the feature ID
in the feature list area when you use the Search ID box in a dimension dialog box.
See PCD-249703.
• You can now see the last feature in the feature list area of the Angle dialog box
when you use a high-resolution monitor. See PCD-249704.
*******************************
Reporting
*******************************
• PC-DMIS is now updated with the latest uploader NuGet package. This means you
can now see the Nexus icon in the Nexus Settings dialog box, Upload to Nexus
Cloud dialog box, and Upload window. See PCD-249490.
*******************************
Vision
*******************************
• PC-DMIS now correctly updates the COVERAGE ACTIVE TARGETS value when
you change in the Edit window, Command mode after you change the COVERAGE
value. See PCD-249071.