DAT_M =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<-37.9,-17.89,2.314>,<-1,0,0>,3.65,21.49 ACTL/<-37.9,-17.89,2.314>,<-1,0,0>,3.65,21.49 TARG/<-37.9,-17.89,2.314>,<-1,0,0> START ANG=10,END ANG=115.5 ANGLE VEC=<0,0,1> DIRECTION=CCW SHOW FEATURE PARAMETERS=YES VOID DETECTION=NO REMEASURE=NO,USE THEO=YES SURFACE=THICKNESS_NONE,0 MEASURE MODE=NOMINALS RMEAS=NONE,NONE,NONE AUTO WRIST=NO CIRCULAR MOVES=STRAIGHT GRAPHICAL ANALYSIS=NO FEATURE LOCATOR=NO,NO,"" SHOW CONTACT PARAMETERS=YES NUMHITS=5,NUMLEVELS=3,DEPTH=1,END OFFSET=10,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=NO,DISTANCE=0 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO DATDEF/M,FEATURES=DAT_M,, $$ NO, ================================================= MOVE/POINT,NORMAL,<-50,-17.89,2.3> MOVE/POINT,NORMAL,<-50,2,-15.23> $$ NO, ================================================= DAT_N =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<-37.9,2,-15.23>,<-1,0,0>,3.65,21.49 ACTL/<-37.9,2,-15.23>,<-1,0,0>,3.65,21.49 TARG/<-37.9,2,-15.23>,<-1,0,0> START ANG=30,END ANG=150 ANGLE VEC=<0,0,1> DIRECTION=CCW SHOW FEATURE PARAMETERS=YES VOID DETECTION=NO REMEASURE=NO,USE THEO=YES SURFACE=THICKNESS_NONE,0 MEASURE MODE=NOMINALS RMEAS=NONE,NONE,NONE AUTO WRIST=NO CIRCULAR MOVES=STRAIGHT GRAPHICAL ANALYSIS=NO FEATURE LOCATOR=NO,NO,"" SHOW CONTACT PARAMETERS=YES NUMHITS=5,NUMLEVELS=3,DEPTH=1,END OFFSET=10,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=NO,DISTANCE=0 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO DATDEF/N,FEATURES=DAT_N,,
I'm open to any and all suggestions.
TIA,
Duane
