I know that many of You have or have had this wish, and many of You have found a solution.
None of them seems to work for me.
I'm running PC-DMIS 2012, and wonder if there might be some software "issues" with this version.
I have tried several of the proposals from the forum, to get the number of OoT out of the measurement, but none of your fine postings seems to work for me.
I have no problems running the script that refresh's the report before printing. So it can't be that.
I have managed to get the counting og the OoT's into the Report-header, and that works 100%, but no matter how I work around it, I can't get it into the program for working with it.
The reason for my frustration is : http://www.pcdmisforum.com/showthread.php?29932-Printing-reports-to-paper-pdf-and-SPC&highlight=paper
And for better understanding, my flow-chart is attached as 'Flowchart for PRINT, PDF & SPC'.
All of the 3 PRINT-functions are finally working just fine, thanks to:
http://www.pcdmisforum.com/showthread.php?29971-Report-Window-Print-Setup-Not-printing-to-correct-location
I get the Paper only, the PDF only and the combined Paper & PDF printed just as I have been looking for.
The above mentioned thread made me help setting up a guide, which is attached as 'Using the PRINT-command'.
Feel free to use and distribute.
Now back to my frustration.
I have tried using the script from AndersI, where he specific mentions that it works for him in PC-DMIS 4.3 MR1
His swedish setup, didn't gave me any trouble :-) , but it doesn't work.
Link: http://www.pcdmisforum.com/showthread.php?30251-Counting-OUTTOL-in-a-program&highlight=AndersI
--- o ---
The surgestions about reading from the ELOGO.DAT
ASSIGN/V1 = GETCOMMAND("File elogo", 1) my understanding - open file elogo, 1 to read in...
ASSIGN/PRINT = GETTEXT("# out of tol", 7,V1) my understanding - gettext or value of # out of tol on the 7th line from file V1 (elogo)
or from the footer
ASSIGN/V1 = GETCOMMAND(File footer", "TOP", 1)
ASSIGN/NC = GETTEXT("numouttol(), 1, V1)
or
ASSIGN/V1 = GETCOMMAND(File footer", "TOP", 1)
ASSIGN/NC = GETVALUE("numouttol(), 1, V1)
doesn't work for me ether.
Don't know if it's because I don't use the footer???
--- o ---
Does any of you have an idea of what's going on?
Isn't there a way to get the number of measures "Out of Tolerance" from my report-header after I have Refreshed it, and into the program, so I can make my flow-chart work, and save a lot of paper.
If anyone of You out there are able to guide me to a solution, I promise to upload my Master, so everyone can copy it, if they want to.
Thanks in advance, I know You have the solution, but maybe not my software-bugs.....
Regards
Mykel
Attached Files
